Try doing a reset with the insertion of something into that little pinhole button on the right hand side of the unit just below the lock switch. I think I have about a 16-gig card in mine, and it was doing that for a while. Doing the reset seemed to solve the problem.
I also find this happens sometimes when the unit is turned off and you happen to depress that zero button accidentally. Then, when you turn the unit back on, it is over on the flash. But do try the reset which should clear things up. Dianne From: Marvella Fresquez [mailto:[email protected]] Sent: Saturday, July 17, 2010 11:11 AM To: BookSense Subject: [GW-Booksense] SD Cards I've got a 32G Kingston card in my BookSense and if I'm reading a book off of the card my unit defaults back to the Flashdrive when I turn on the unit. I've switched the default to the card but that doesn't change. Was wondering if anyone else is having problems with this? This is really frustrating. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list andyour message is related to GW Micro or the BookSense, then please consider sending your message to [email protected] so the entire list will receive it. To manage your subscription to gw-booksense, visit: http://www.gwmicro.com/listserv If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list andyour message is related to GW Micro or the BookSense, then please consider sending your message to [email protected] so the entire list will receive it. To manage your subscription to gw-booksense, visit: http://www.gwmicro.com/listserv
