I seriously doubt it as there is absolutely nothing displayed that is in text format. Flex's software uses waterfall displays, icons, and all manner of pictorials to represent all of the radios controls, not to mention the spectrum analyzer that is basic feature of the radio.. There are also many hundreds of menus as I understand it, all of which are also graphical in nature without text. If it turned out to be possible to write a script to operate a Flex, which I don't think is likely, it would be massive and unspeakably complex, and I doubt anyone would be willing to invest the time in writing one without charging an arm and a leg. Remember, there isn't a single knob, switch, or button on the radio itself. It is just a plain box with a number of conections. No controls, no meters, no nothing.
BTW, it is quite likely that most, if not all, future ham rigs will use SDR technology. It is much cheaper for a company to build a plain radio without any physical controls, and present the functions on a large display and thru software. There is a lot of discussion along these lines all over the bands. SDR radios will become as cheap as cellphones are today. The companies will make their money selling the control software. That is likely to spell big trouble for us. 73 Alan R. Downing Phoenix, AZ -----Original Message----- From: Russ Kiehne [mailto:[email protected]] Sent: Thursday, January 06, 2011 7:28 AM To: [email protected] Subject: Re: flex radio I take it, no one would be able to write a script to make it accessible with WE? ----- Original Message ----- From: "Alan R. Downing" <[email protected]> To: "'Jim Johnson'" <[email protected]>; "'Curtis Delzer'" <[email protected]> Cc: <[email protected]> Sent: Wednesday, January 05, 2011 2:39 PM Subject: RE: flex radio > According to everyone that I have spoken with that use the Flex line of > rigs, as well as to the factory itself, none of the radios are accessible > to > blind operators. Nothing whatsoever can be controlled other than by the > graphical interface. You can't even change frequency, band, volume, or > anything else if you can't see the screen. The radios themselves have no > "regular" controls of any kind. > > > > Blind hams have no choice other than to scratch Flex radios off of their > wish lists. I was prepared to buy a Flex 5000, but was told I might as > well > throw it in the trash when it arrives. > > > > 73 > > > > > > > > Alan R. Downing > > Phoenix, AZ > > > > From: Jim Johnson [mailto:[email protected]] > Sent: Tuesday, January 04, 2011 4:41 PM > To: Curtis Delzer > Cc: [email protected] > Subject: Re: flex radio > > > > flex radio is a amateur radio tranceiver which has to display and all of > the > controls as a software package on your computer instead of hardware > controls > like knobs and buttons. the other part of the radio is the rf transmit > and > receive which is hardware. I don't know that this package would be very > accessable but not sure. I have never seen it, just read about it. > > Jim Johnson > > > > ----- Original Message ----- > > From: Curtis Delzer <mailto:[email protected]> > > To: John W. Carty <mailto:[email protected]> ; 'gw-info (List)' > <mailto:[email protected]> > > Sent: Tuesday, January 04, 2011 1:51 PM > > Subject: Re: flex radio > > > > What does this flex radio software do? > > At Tuesday 1/4/2011 10:45 AM, John W. Carty wrote: > > > > For any ham radio operators out there using WE, has anyone attempted to > use > WE with the software defined radio called flex radio? > > The package is pretty spendy but if the interface is really accessible I > might give it a try. But I'd like to avoid wasting my money. > > John, Kf5dcg > > > > > If you reply to this message it will be delivered to the original sender > only. If your reply would benefit others on the list and your message is > related to GW Micro, then please consider sending your message to > [email protected] so the entire list will receive it. > > GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can > manage your list subscription at http://www.gwmicro.com/listserv. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
