Casey , You get the prize for the day! That worked exactly as you described. WE is up and chattering. Thanks much!
-Len On 10/22/2011 6:25 PM, Casey wrote: > hi okay give this a try. > Just go to your desktop and then hit your start menu key. > Then you should land in a search box. > When you get in that search box type sound and then go down with your > down arrow to the selection right after control panel. > You will have one called sound. > Hit enter on that and there you can pick things to adjust like your > record or play back settings. > go in to your play back settings and make sure you have your speakers > set up for stereo. > I changed mine to five point 1 in the same place the other day and I had > all of my sounds. > But know speech from window eyes or NVDA that I have installed. > So make sure you have your playback set to stereo and not something like > 5.1 or something like that and then once you get to stereo select it and > that should bring speech back for window eyes. > You might need sighted assistance to do this cause with know speech that > doesn't help things much. > So give that a shot and hope that might help you both out. > > Casey 10/22/2011 2:56 PM, Len Burns wrote: >> I have something quite strange going on for which I have run out of >> guesses. >> >> Today I brought up a new Windows 7 machine. All looks normal with the >> system, the sound is working fine from the perspective of windows. WE >> installed Window-Eyes and as far as it is concerned it is running. The >> minor detail is that there is no speech output with any of the soft >> synthesizers. The sound card is set to use the onboard realtek sound >> card. WE is certainly making good use of the sound system to alert >> about its updates, but absolutely no speech output. I checked to be >> sure the WE video driver is present and working. It reports that it is >> operating normally. I checked the same on the driver for the sound >> card, all well. I am currently out of ideas as to the cause of the lack >> of speech output. Any suggestions as to a direction would be greatly >> appreciated. Thanks much! >> >> -Len >> If you reply to this message it will be delivered to the original >> sender only. If your reply would benefit others on the list and your >> message is related to GW Micro, then please consider sending your >> message to [email protected] so the entire list will receive it. >> >> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You >> can manage your list subscription at http://www.gwmicro.com/listserv. >> >> > If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
