Hi listers, Here's what I do in explorer when unsure of a spelling. I press f2 to rename the file, press home to get back to the first letter, arrow through the filename, and finally press escape after determining the spelling. Perhaps this will help someone along the way.
Rusty -----Original Message----- From: Shannon [mailto:[email protected]] Sent: Thursday, March 07, 2013 3:56 PM To: 'Tom Kingston'; 'Gwmicro gw-info mail list' Subject: RE: problems with WE 8.1 and Windows explorer in win 7 Tom, I did as you suggested and changed my curser key delay for all programs even though you said to set it to program specific. I changed the value to 4 and it might have done the trick for the Explorer problem and so far so good in the outlook inbox list too. I did the step below and turned off the preview setting like you said. I have no idea what it was so I don't think I'll miss it in the slightest. I do have another question regarding the explorer window. Now that I believe I can trust to hear what WE is telling me is the file name some times the names are not clear. We have some people who name files funny things. How do I route the mouse to that selection to read letter by letter that file name? I press the route mouse hot key and it says mouse routed but it seems to be on the left side in the tree view part of the window and not in the file list with the highlighted file name. I know I could use the context key and use the rename option to read letter by letter but that seems a bit over the top. My mouse should be able to do this for me? Thanks for the suggestions. So far so good. I give that suggestion a two thumbs up so far! Shannon -----Original Message----- From: Tom Kingston [mailto:[email protected]] Sent: Thursday, March 07, 2013 2:32 PM To: Gwmicro gw-info mail list Subject: Re: problems with WE 8.1 and Windows explorer in win 7 I haven't had any problems, Manny, other than the Thunderbird composition window getting scrambled. But that tends to be if I'm either writing a long message or doing a lot of editing. The only way to clean it up I've found is to add a second action to the program scope Control-Home cursor key in Thunderbird_write.set. I add, Execute hot key, Redraw, and then put a delay of 10 on that key. Then when I Control-Home it redraws the screen and reads the line. I then just have to go back down through the message. I haven't had the problem in Explorer. So I just suggested a cursor delay to see if it would work. One thing I do recommend in Explorer is to turn off Show preview handles in the preview pane. You can do this from within Explorer or the Folder options in the Windows control panel. Tools. Advanced. Uncheck Show preview handles in preview pane. Hth, Tom On 3/7/2013 2:31 PM, manny wrote: > Hi Tom, > 1 > did you have this problem and fixed it by doing what you suggested. > 2 > why if everything is working well why does WE8 get confused and not > read correctly after a while of tabbing around different programs? > 3. > while writing this email, I had to cut and paste to wordpad, because > WE8 kept repeating the same line twice instead of the next line. > In thunderbird WE8 read the 2 lines as: > why if everything is working well why does WE8 get confused > why if everything is working well why does WE8 get confused while in > wordpad we8 read it correctly as: > why if everything is working well why does WE8 get confused and not > read correctly after a while of tabbing around different programs? > > > Good luck, Manny > checkout my stand-up comedy performance > http://www.youtube.com/watch?v=75fbevlz10g > computer specifications: Window Eyes 8 Dell xps420 with 8 gb memory c > p > u: Intel q6600 quad core dual boot between Windows 7 64-bit and > windows > 8 64 bit all software and drivers are up to dateOn 3/7/2013 8:53 AM, > Tom Kingston wrote: > > You might try making cursor delay program specific and upping it. > > Open the WE control panel. > > Cursor keys. > > Options. > > Change cursor delay scope from global to program. > > Try upping the delay in steps of 2 or 3. > > Don't forget to Control-S Save. > > > > Hth, > > Tom > > > > > > Hth, > > Tom > > > > > > On 3/7/2013 1:37 PM, manny wrote: > >> Hi Shannon, > >> What you are describing sometimes happens to me, and it is > something all >> users should be alerted to be very careful. > >> I have inadvertently deleted emails, because of WE8.1 has > erroneously >> voiced previous subject. > >> I constantly have to refresh the page and arrow up and down to > confirm > >> the reality of the email being highlighted before I delete it. > >> The same holds true in a explorer folder. > >> > >> I think the possible causes are too much tabbing around different > >> programs, and coming back from hibernation or sleep mode, seems to > >> confuse WE8.1. > >> > >> Good luck, Manny > >> checkout my stand-up comedy performance >> > http://www.youtube.com/watch?v=75fbevlz10g > >> computer specifications: Window Eyes 8 Dell xps420 with 8 gb > memory c p >> u: Intel q6600 quad core dual boot between Windows 7 > 64-bit and windows >> 8 64 bit all software and drivers are up to > date >> On 3/7/2013 8:03 AM, Shannon wrote: > >>> > >>> Good afternoon, > >>> > >>> I am really getting disturbed by the fact that WE can’t or won’t > tell >>> me the truth. > >>> > >>> When trying to find a file in windows explorer and arrowing up > and >>> down the list of files and folders WE is reporting erroneous things. > >>> > >>> I know that I don’t have multiple files in this folder with the > same >>> name but WE seams to get a file title stuck In its head and > will not >>> let go. As I arrow up and down I keep hearing the same title. > >>> > >>> What is the problem. > >>> > >>> I am using Windows seven > >>> > >>> WE 8.1 > >>> > >>> The set files are explorer. Set and explorer is associated. > >>> > >>> High contrast black color scheme > >>> > >>> The view is a list no icons and has details checked. > >>> > >>> Why can’t I have We telling me the selected item? > >>> > >>> I am getting very frustrated by this. > >>> > >>> I also have a problem with WE hanging onto old things and > repeating >>> things that are long gone, such as an email title that > has been read, >>> then deleted, and Outlook is closed. Alt tab > across different >>> programs will result in hearing that old email title > being spoken. > >>> > >>> Something is really wrong. This didn’t start happening until 8.??? > >>> > >>> This didn’t happen for me with 7.??? And XP >>> >>> Since I > upgraded to win seven and WE 8 I don’t trust what WE is >>> telling > me anymore. > >>> > >>> It also reads the wrong titles of email in outlook in the inbox > >>> message list. I will hear a from and subject announced, only to > find >>> when I open it that it is a different one. > >>> > >>> What could be my problem? > >>> > >>> Shannon > > If you reply to this message it will be delivered to the original > sender only. If your reply would benefit others on the list and your > message is related to GW Micro, then please consider sending your > message to [email protected] so the entire list will receive it. > > > > GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You > can manage your list subscription at http://www.gwmicro.com/listserv. > > > > > > If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
