I will use putty to tellnet and read line by line using mouse pointer movements. Maybe the screen is moving too fast or something is interfearing the screen info. I generally use putty to configure and talk to all my HP switches and also some of my linux boxes. The only thing I can say is I don't have experience with cisco vpn software, I use aruba, watchguard and now moving towards sophos at this stage. It could be the vpn connection is slow, client to firewall vpn connection is generally slower in such instant. That's the limitation or restriction of a firewall box or UTM. Or even limited by your internet connection. How much the office or corperate network can upload the info to you is the key of all vpn connection. Not the download. I can go on, but its quite extensive to troubleshoot as it can be some bottomnck somewhere as little as a switch or the trunk connection somewhere or some routers configure or the device itself. -------------------- regards Thomas N. Chan From: Martha Reaney [mailto:[email protected]] Sent: Monday, 27 October 2014 8:50 PM To: GW Micro Subject: Any network gurus on this list? I am tele-commuting from home. Using Windows 7, Window-Eyes 8.4, and TeraTerm Pro. Connecting to my employer via Cisco AnyConnect to the VPN. From there I use Teraterm Pro to connect to two different hosts. With host 1, W. E. performs well. I can open up a file using VI and use the up and down arrows to read each line. When I connect to the other host, W. E. does not seem to recognize the start and end of a line of code on a screen. I arrow up and down and I am hearing things from the top of the window. When I arrow to the right and hit the end of the line, W. E. starts to read from the top of the window and seems to want to "read to end". I've played with Teraterm Pro scroll buffer settings, etc. but haven't hit on the correct "fix" yet. I have Teraterm Pro set to have terminal size = window size. My boss is wondering if it is networking problems. As a test, I took the Windows 7 machine to one of our office buildings and connected to host 2 from there. W. E. behaved much better. Anybody got any ideas why W. E. and TeratermPro "plays nice" with host 1 and not host 2 when I am connected to the VPN from home? My employer is not going to spend lots of time and resources tracking this down for just little ol' me. Seems that something is different about the set up of host1 and host 2, but, this is way outside of my knowledge. Martha R. IL , etc.
If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
