Hello Joe. Thanks for the detailed explanation. However it's not just
about the driver, it's because of WinCE not having printing support
natively as was explained by support. Printing from WinCE is a hack at
best and therefore must require a printer with the right pcl3 support.
So again, it's not just about a driver, but about capabilities. It
doesn't have anything to do with DOS or Windows as it's a WinCE issue.
Hope this helps clear it up.
Joe Giovanelli wrote the following on 5/13/2009 9:32 PM:
Hi, Listers,
I've been "messing" with various printers and none will print using our Braille
Pluses.
When we study the word processor section of the Braille Sense manual, we find
very detailed instructions about how to embossor print. These instructions are
well written and easy to follow.
At the end of the printing section we read that the printer we use must be an HP or
compatible printer and must support PCL 3 or higher. Well, PCL stands for printer
control language. If you look up PCL, you'll discovered that there quite a few
different "languages.
I have a reasonably new laser printer, an HP 1020 P. I have no idea what PCL
it uses, but I was unable to print from the Braille Sense.
Undaunted, I hunted around and found a couple of parallel printers. I used the USB to parallel adapter, set the options for a parallel port printer.
Unless there's another place in the manual about the adapter and printing with
a parallel printer.
I wrote to GW Micro support and was told that even parallel printers must deal with PCL 3.
I have been involved with computers for close to 30 years and have not encountered the PCL problem, either with DOS or with Windows. Of course, Windows expect the correct drivers for the printer in use. I wonder if these drivers are where this PCL 3 resides.
Our units do not ask for drivers. I'm sort of guessing here, but it seems that
we have just one driver, so if our printers cannot work with it, we will not be
able to print.
It isn't worth buying a printer which will work with our units unless you do
not have a computer and don't want one.
If you have a computer, get the file you wish to print and move it to your
computer and you'll print and save lots of time.
I've spent lots of time so hope I saved you from having to do the same thing.
If I'm right about all this actually being a driver issue, it would be better
to just say something about that in the manual.
I hope this was of interest and help.
Joe G.
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 4075 (20090514) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
--
Raul A. Gallegos -- GW Micro Technical Support
Voice: 260-489-3671 -- Fax: 260-489-2608
WEB: http://www.gwmicro.com
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 4075 (20090514) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com