Joe. With all due respect, you are making this far more complicated than what it is. Also, it does not have to do with usb or parallel at all. As Mike pointed out to you in support, even if you use parallel or usb, the printer still needs to support pcl3. This is because the driver in WinCE is looking for this.

Hope this clears it up.

Many thanks.

Joe Giovanelli wrote the following on 5/14/2009 1:59 PM:
Thanks for your note.

If a person tries to print using Windows but does not have the proper driver, 
no printing will be done. When that driver is installed, printing can be done.

I am guessing here, but whatever else the driver needs, the proper PCL must be 
present as a part of the driver.  This is why I more or less said that there 
has to be one driver even in WinCE.  Otherwise printing if not possible.  
Within the driver in our notetakers, one of its requirements must be that PL 3 
must be present, and the printer being used also must have that in its firmware.


I don't know if one can buy a parallel printer and even then, would it likely 
have the PCL 3?  If that's the case, why supply the USB to parallel converter; 
it's unlikely that no paralleverl printer will ever work with our units.

I think Our manuals need more info about printing than is present, especially 
about parallel printers.  You are all programmers and are so familiar with all 
of these elements that you tend to overlook which we users need to know or 
think we already know.

Joe G.



----- Original Message -----
From: "Raul A. Gallegos" <[email protected]>
To: [email protected]
Date: Thursday, May 14, 2009 8:55:54
Subject: Re: [GWN] printing


Hello Joe. Thanks for the detailed explanation. However it's not just about the driver, it's because of WinCE not having printing support natively as was explained by support. Printing from WinCE is a hack at best and therefore must require a printer with the right pcl3 support. So again, it's not just about a driver, but about capabilities. It doesn't have anything to do with DOS or Windows as it's a WinCE issue.

Hope this helps clear it up.

Joe Giovanelli wrote the following on 5/13/2009 9:32 PM:
Hi, Listers,

I've been "messing" with various printers and none will print using our Braille 
Pluses.

When we study the word processor section of the Braille Sense manual, we find 
very detailed instructions about how to embossor print.  These instructions are 
well written and easy to follow.

At the end of the printing section we read that the printer we use must be an HP or 
compatible printer and must support PCL 3 or higher.  Well, PCL stands for printer 
control language.  If you look up PCL, you'll discovered that there quite a few 
different "languages.

I have a reasonably new laser printer, an HP 1020 P.  I have no idea what PCL 
it uses, but I was unable to print from the Braille Sense.

Undaunted, I hunted around and found a couple of parallel printers. I used the USB to parallel adapter, set the options for a parallel port printer.
Unless there's another place in the manual about the adapter and printing with 
a parallel printer.


I wrote to GW Micro support and was told that even parallel printers must deal with PCL 3. I have been involved with computers for close to 30 years and have not encountered the PCL problem, either with DOS or with Windows. Of course, Windows expect the correct drivers for the printer in use. I wonder if these drivers are where this PCL 3 resides.
Our units do not ask for drivers. I'm sort of guessing here, but it seems that 
we have just one driver, so if our printers cannot work with it, we will not be 
able to print.

It isn't worth buying a printer which will work with our units unless you do 
not have a computer and don't want one.

If you have a computer, get the file you wish to print and move it to your 
computer and you'll print and save lots of time.

I've spent lots of time so hope I saved you from having to do the same thing.

If I'm right about all this actually being a driver issue, it would be better 
to just say something about that in the manual.

I hope this was of interest and help.

Joe G.


__________ Information from ESET NOD32 Antivirus, version of virus signature 
database 4075 (20090514) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



--
Raul A. Gallegos -- GW Micro Technical Support
Voice: 260-489-3671 -- Fax: 260-489-2608
WEB: http://www.gwmicro.com


__________ Information from ESET NOD32 Antivirus, version of virus signature 
database 4075 (20090514) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature 
database 4076 (20090514) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




--
Raul A. Gallegos -- GW Micro Technical Support
Voice: 260-489-3671 -- Fax: 260-489-2608
WEB: http://www.gwmicro.com


__________ Information from ESET NOD32 Antivirus, version of virus signature 
database 4076 (20090514) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com


Reply via email to