Well, Raul can explain this much better than I.  But, on a lot of the
laptops, using some of the keys on the right side of the keyboard along with
the FN key, these keystrokes can then be used to do the same as the numpad
found on the far right of regular desktop keyboards.  For example, with the
numlock turned off, holding down the FN key with J K and L produces end and
down arrow and page down respectively.  And, holding down the FN key with U
I O produces left arrow and center and right arrow respectively.  Now, when
the numlock is on, the FN key with J K L produces 1 2 and 3 respectively,
while the FN key with U  I O produces 4 5 and 6 respectively, and so on. 
And, while
you
could use the FN key combinations with JAWS, I've always just found using
their laptop keyboard layout easy enough to use without doing so.  But, when 
using WE and listening to the tutorial or manual, it is much easier to be 
able to use, and have WE say with the insert1 key describer if necessary, 
the same keystrokes as the tutorial and/or     manual.
----- Original Message ----- 
From: "Stacey Robinson" <[email protected]>
To: <[email protected]>
Sent: Wednesday, June 17, 2009 9:45 PM
Subject: Re: [GWN] Braille display issues


Vicki,
Ok, here's a question.  I"ve never used my fn key for numpad functions. How
would you do this?  Also, could you do this for jaws?

Have a blessed day,
Stacey Robinson and GEB dog Chesley
Eagleville, Tennessee.
[email protected]

----- Original Message ----- 
From: "Vicky Collins" <[email protected]>
To: <[email protected]>
Sent: Wednesday, June 17, 2009 8:47 PM
Subject: Re: [GWN] Braille display issues


> I'm no expert on using Window-Eyes by any means, as I guess I've been
> using JAWS for too long to be as committed as I would hope to learning WE.
> However, when I do go through the manual or the tutorial and try to use
> the program, things seem to make much more sense, at least for me, anyway,
> when I'm using the FN key with the appropriate keys to activate the numpad
> key functions.  Guess that, when I use those keystrokes, I can more
> closely identify with their equivalents given in the WE tutorial and
> manual, as both are based only on the desktop layout.
>
>>----- Original Message -----
>>From: "Stacey Robinson" <[email protected]
>>To: <[email protected]
>>Date sent: Wed, 17 Jun 2009 11:32:38 -0500
>>Subject: Re: [GWN] Braille display issues
>
>>It sort of hlps.
>>I'll look at the appendix.  I looked ther once, and got the
> impression that
>>you couldn't do evrything with the laptop layout.
>>I'll look again.  I think I'll download the audio version of the
> manual.
>>Taht might be easier to understand.
>>Have a blessed day,
>>Stacey Robinson and GEB dog Chesley
>>Eagleville, Tennessee.
>>[email protected]
>
>>----- Original Message -----
>>From: "Raul A.  Gallegos" <[email protected]
>>To: <[email protected]
>>Sent: Wednesday, June 17, 2009 10:27 AM
>>Subject: Re: [GWN] Braille display issues
>
>
>>> Personally I don't like the laptop layout because I make friends
> with my
>>> fn-key of my laptop.  This way I can use the same hot keys as
> the desktop.
>>> However to answer your question, the laptop layout and the other
> layouts
>>> we have are located in the appendix a of the Window-Eyes manual.
>
>>> You can use Window-Eyes just as easily in either laptop or
> desktop layout.
>
>>> Hope this helps.
>
>>> Stacey Robinson wrote the following on 6/16/2009 12:41 PM:
>>>> Hi Raul,
>>>> Thanks.
>>>> I was looking at the window eyes manual but couldn't find
> anything about
>>>> laptop keystrokes.
>>>> CAn you do evrything with WE on a laptop that you can on a
> desktop?
>>>> Feel free to write off list if this is off topic.
>
>>>> Have a blessed day,
>>>> Stacey Robinson and GEB dog Chesley
>>>> Eagleville, Tennessee.
>>>> [email protected]
>
>>>> ----- Original Message ----- From: "Raul A.  Gallegos"
> <[email protected]
>>>> To: <[email protected]
>>>> Sent: Tuesday, June 16, 2009 10:32 AM
>>>> Subject: Re: [GWN] Braille display issues
>
>
>>>>> Stacey, if you make changes to Window-Eyes, you need to save
> them.  We
>>>>> won't assume to automatically save them for you.  So once you
> make any
>>>>> changes, press control-backslash for the WE panel, alt-f for
> file menu,
>>>>> s for save, and enter to do it.
>
>>>>> Many thanks.
>
>>>>> Stacey Robinson wrote the following on 6/14/2009 5:52 PM:
>>>>>> Hi Erik,I've done all that.
>>>>>> I think I"ll just switch to WE when I want to use a display, but
> I have
>>>>>> noticed that my sttings in window eyes don't stick from session
> to
>>>>>> session.
>
>>>>>> Have a blessed day,
>>>>>> Stacey Robinson and GEB dog Chesley
>>>>>> Eagleville, Tennessee.
>>>>>> [email protected]
>
>>>>>> ----- Original Message ----- From: "erik burggraaf"
>>>>>> <[email protected]
>>>>>> To: <[email protected]
>>>>>> Sent: Sunday, June 14, 2009 3:25 PM
>>>>>> Subject: Re: [GWN] Braille display issues
>
>
>>>>>>> Hi, did you figure this out?
>
>>>>>>> If not, press insert 6.  It doesn't matter where you are when
> you do
>>>>>>> this as long as jaws is running and your braille display is
> connected.
>
>>>>>>> Press control shift D and you should hear something like
> default.jcf
>>>>>>> jaws configuration manager.
>>>>>>> Now my direct knowledge of jaws ends.  At this point I'd just
> take
>>>>>>> over the client's computer because I know I can find the
> information.
>>>>>>> Basicly, somewhere in the set menue I believe there is a braille
>>>>>>> options dialog which looks just like the one from the jaws main
>>>>>>> window.
>>>>>>> Make your changes in there and press OK.
>>>>>>> Now press alt f4 and when it ask if you want to save the changes
> to
>>>>>>> default.jcf, say yes.
>
>>>>>>> That should do it right there.
>
>>>>>>> Best,
>
>
>>>>>>> erik burggraaf
>>>>>>> A+ sertified technician and user support consultant.
>>>>>>> Phone: 888-255-5194
>>>>>>> Email: [email protected]
>
>>>>>>> On 13-Jun-09, at 5:25 PM, Stacey Robinson wrote:
>
>>>>>>>> Hi Vicki and all,
>>>>>>>> Can you help?
>>>>>>>> I figured out in outlook express that if I turn marking with
> dots
>>>>>>>> seven and eight off the dots go away.  This works great, but I
> can't
>>>>>>>> find a way to do this in the configuration manager so that it
> will
>>>>>>>> stick no matter where I am.
>>>>>>>> Please help.
>
>>>>>>>> Have a blessed day,
>>>>>>>> Stacey Robinson and GEB dog Chesley
>>>>>>>> Eagleville, Tennessee.
>>>>>>>> [email protected]
>
>
>
>
>>>>>> __________ Information from ESET NOD32 Antivirus, version of
> virus
>>>>>> signature database 4159 (20090616) __________
>
>>>>>> The message was checked by ESET NOD32 Antivirus.
>
>>>>>> http://www.eset.com
>
>
>
>
>>>>> --
>>>>> Raul A.  Gallegos -- GW Micro Technical Support
>>>>> Voice: 260-489-3671 -- Fax: 260-489-2608
>>>>> WEB: http://www.gwmicro.com
>
>
>>>>> __________ Information from ESET NOD32 Antivirus, version of
> virus
>>>>> signature database 4159 (20090616) __________
>
>>>>> The message was checked by ESET NOD32 Antivirus.
>
>>>>> http://www.eset.com
>
>
>
>
>>>> __________ Information from ESET NOD32 Antivirus, version of
> virus
>>>> signature database 4162 (20090617) __________
>
>>>> The message was checked by ESET NOD32 Antivirus.
>
>>>> http://www.eset.com
>
>
>
>
>>> --
>>> Raul A.  Gallegos -- GW Micro Technical Support
>>> Voice: 260-489-3671 -- Fax: 260-489-2608
>>> WEB: http://www.gwmicro.com
>
>
>>> __________ Information from ESET NOD32 Antivirus, version of
> virus
>>> signature database 4162 (20090617) __________
>
>>> The message was checked by ESET NOD32 Antivirus.
>
>>> http://www.eset.com
>
>
>

Reply via email to