Oh, I see,Thanks.

Have a blessed day,
Stacey Robinson and GEB dog Chesley
Eagleville, Tennessee.
[email protected]

----- Original Message ----- From: "Vicky Collins" <[email protected]>
To: <[email protected]>
Sent: Thursday, June 18, 2009 5:01 AM
Subject: Re: [GWN] using FN key on laptop/was Braille display issues


Well, Raul can explain this much better than I.  But, on a lot of the
laptops, using some of the keys on the right side of the keyboard along with
the FN key, these keystrokes can then be used to do the same as the numpad
found on the far right of regular desktop keyboards. For example, with the numlock turned off, holding down the FN key with J K and L produces end and down arrow and page down respectively. And, holding down the FN key with U I O produces left arrow and center and right arrow respectively. Now, when
the numlock is on, the FN key with J K L produces 1 2 and 3 respectively,
while the FN key with U  I O produces 4 5 and 6 respectively, and so on.
And, while
you
could use the FN key combinations with JAWS, I've always just found using
their laptop keyboard layout easy enough to use without doing so. But, when
using WE and listening to the tutorial or manual, it is much easier to be
able to use, and have WE say with the insert1 key describer if necessary,
the same keystrokes as the tutorial and/or     manual.
----- Original Message ----- From: "Stacey Robinson" <[email protected]>
To: <[email protected]>
Sent: Wednesday, June 17, 2009 9:45 PM
Subject: Re: [GWN] Braille display issues


Vicki,
Ok, here's a question. I"ve never used my fn key for numpad functions. How
would you do this?  Also, could you do this for jaws?

Have a blessed day,
Stacey Robinson and GEB dog Chesley
Eagleville, Tennessee.
[email protected]

----- Original Message ----- From: "Vicky Collins" <[email protected]>
To: <[email protected]>
Sent: Wednesday, June 17, 2009 8:47 PM
Subject: Re: [GWN] Braille display issues


I'm no expert on using Window-Eyes by any means, as I guess I've been
using JAWS for too long to be as committed as I would hope to learning WE.
However, when I do go through the manual or the tutorial and try to use
the program, things seem to make much more sense, at least for me, anyway, when I'm using the FN key with the appropriate keys to activate the numpad
key functions.  Guess that, when I use those keystrokes, I can more
closely identify with their equivalents given in the WE tutorial and
manual, as both are based only on the desktop layout.

----- Original Message -----
From: "Stacey Robinson" <[email protected]
To: <[email protected]
Date sent: Wed, 17 Jun 2009 11:32:38 -0500
Subject: Re: [GWN] Braille display issues

It sort of hlps.
I'll look at the appendix.  I looked ther once, and got the
impression that
you couldn't do evrything with the laptop layout.
I'll look again.  I think I'll download the audio version of the
manual.
Taht might be easier to understand.
Have a blessed day,
Stacey Robinson and GEB dog Chesley
Eagleville, Tennessee.
[email protected]

----- Original Message -----
From: "Raul A.  Gallegos" <[email protected]
To: <[email protected]
Sent: Wednesday, June 17, 2009 10:27 AM
Subject: Re: [GWN] Braille display issues


Personally I don't like the laptop layout because I make friends
with my
fn-key of my laptop.  This way I can use the same hot keys as
the desktop.
However to answer your question, the laptop layout and the other
layouts
we have are located in the appendix a of the Window-Eyes manual.

You can use Window-Eyes just as easily in either laptop or
desktop layout.

Hope this helps.

Stacey Robinson wrote the following on 6/16/2009 12:41 PM:
Hi Raul,
Thanks.
I was looking at the window eyes manual but couldn't find
anything about
laptop keystrokes.
CAn you do evrything with WE on a laptop that you can on a
desktop?
Feel free to write off list if this is off topic.

Have a blessed day,
Stacey Robinson and GEB dog Chesley
Eagleville, Tennessee.
[email protected]

----- Original Message ----- From: "Raul A.  Gallegos"
<[email protected]
To: <[email protected]
Sent: Tuesday, June 16, 2009 10:32 AM
Subject: Re: [GWN] Braille display issues


Stacey, if you make changes to Window-Eyes, you need to save
them.  We
won't assume to automatically save them for you.  So once you
make any
changes, press control-backslash for the WE panel, alt-f for
file menu,
s for save, and enter to do it.

Many thanks.

Stacey Robinson wrote the following on 6/14/2009 5:52 PM:
Hi Erik,I've done all that.
I think I"ll just switch to WE when I want to use a display, but
I have
noticed that my sttings in window eyes don't stick from session
to
session.

Have a blessed day,
Stacey Robinson and GEB dog Chesley
Eagleville, Tennessee.
[email protected]

----- Original Message ----- From: "erik burggraaf"
<[email protected]
To: <[email protected]
Sent: Sunday, June 14, 2009 3:25 PM
Subject: Re: [GWN] Braille display issues


Hi, did you figure this out?

If not, press insert 6.  It doesn't matter where you are when
you do
this as long as jaws is running and your braille display is
connected.

Press control shift D and you should hear something like
default.jcf
jaws configuration manager.
Now my direct knowledge of jaws ends.  At this point I'd just
take
over the client's computer because I know I can find the
information.
Basicly, somewhere in the set menue I believe there is a braille
options dialog which looks just like the one from the jaws main
window.
Make your changes in there and press OK.
Now press alt f4 and when it ask if you want to save the changes
to
default.jcf, say yes.

That should do it right there.

Best,


erik burggraaf
A+ sertified technician and user support consultant.
Phone: 888-255-5194
Email: [email protected]

On 13-Jun-09, at 5:25 PM, Stacey Robinson wrote:

Hi Vicki and all,
Can you help?
I figured out in outlook express that if I turn marking with
dots
seven and eight off the dots go away.  This works great, but I
can't
find a way to do this in the configuration manager so that it
will
stick no matter where I am.
Please help.

Have a blessed day,
Stacey Robinson and GEB dog Chesley
Eagleville, Tennessee.
[email protected]




__________ Information from ESET NOD32 Antivirus, version of
virus
signature database 4159 (20090616) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




--
Raul A.  Gallegos -- GW Micro Technical Support
Voice: 260-489-3671 -- Fax: 260-489-2608
WEB: http://www.gwmicro.com


__________ Information from ESET NOD32 Antivirus, version of
virus
signature database 4159 (20090616) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




__________ Information from ESET NOD32 Antivirus, version of
virus
signature database 4162 (20090617) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




--
Raul A.  Gallegos -- GW Micro Technical Support
Voice: 260-489-3671 -- Fax: 260-489-2608
WEB: http://www.gwmicro.com


__________ Information from ESET NOD32 Antivirus, version of
virus
signature database 4162 (20090617) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com





Reply via email to