Where is the compressed reading mode, I think I went through all the menu items particularly in the read menu and can't find it. Or does it only apply to .brl documents or something. Thanks Tessa
----- Original Message ----- From: "don bishop" <[email protected]> To: <[email protected]> Sent: Tuesday, September 29, 2009 2:42 PM Subject: Re: [GWN] line breaks when reading .brf files Thanks Terri. I wasn't sure of all the ramifications of using the compressed format, but it looks like that's the best option at the moment. It really is unfortunate that you can't save the setting for the document though. I do understand that significant improvements/enhancements are planned for the word processor at some point and I hope the ability to save settings will be among them. Don On 9/29/2009 11:35 AM, Terri Pannett wrote: > Hi, Don, > > The compressed read-only mode will allow you to read a document without > seeing the line breaks. The drawback of compressed read-only mode is you > cannot edit the document. > > There are two other menu items which might be helpful to you. You can > turn off format markers. You'll still have the short lines when reading > the document in the original mode, but you won't see the marker. The > other option is to turn on the "skip blank lines." You can go line by > line and the BrailleSense will automatically skip blank lines. > > But, no matter which mode you use, the BrailleSense will still see line > breaks as paragraph boundaries, so you cannot scroll from paragraph to > paragraph in .brf documents. This is a drawback and an annoyance to me. > The only work-around for this is to use the search command and look for > two spaces. > > When you close your document, the compressed read-only settings won't be > saved, so you must activate them every time you open the document. > > Terri Amateur Radio call sign KF6CA. > ----- Original Message ----- From: "don bishop" <[email protected]> > To: <[email protected]> > Sent: Monday, September 28, 2009 8:45 PM > Subject: [GWN] line breaks when reading .brf files > > >> Hi all, >> >> Sure been quiet around here lately. I'm reading a .brf file from >> bookshare on by braillesense plus. It is reading just fine except that >> every other line has 32 characters of braille and the other lines have >> 8 or so. Obviously it's an issue with the line length within the .brf >> file and the sense is splitting it with 32 characters on one braille >> line of the display with the remaining characters of the line on the >> next display. Is there any way to turn off the line break in the .brf >> file so the sense won't see these? I don't see any such setting in the >> bs command list, but I could be missing something too. >> >> It's certainly not impossible to read this way, but it really would be >> easier if each display line was filled. >> >> Thanks, >> >> Don >> >> >> __________ Information from ESET NOD32 Antivirus, version of virus >> signature database 4468 (20090929) __________ >> >> The message was checked by ESET NOD32 Antivirus. >> >> http://www.eset.com >> >> >> > > > __________ NOD32 4468 (20090929) Information __________ > > This message was checked by NOD32 antivirus system. > http://www.eset.com > > >
