Hi,
It's in the word processor's file menu under settings. I don't know what
the hot keys are for the braille keyboards, but the qwerty command to toggle
between original mode and compressed mode is control-4; The one to toggle
read-only is control-2. The command to get to the settings menu is
control-e. For some unknown reason, I have to turn on both compressed mode
and read-only mode for the text to appear right. According to the manual,
when compressed mode is on, read-only is supposed to automatically turn on,
but the read-only mode does NOT turn on automatically with my unit.
I have also discovered that if I find a mistake and I want to edit the
document and I'm in read-only compressed, I must close the document and
reopen it before I edit it. If I just turn off read-only compressed and try
to edit it, the file will become corrupted.
Terri Amateur Radio call sign KF6CA.
----- Original Message -----
From: "don bishop" <[email protected]>
To: <[email protected]>
Sent: Tuesday, September 29, 2009 3:08 PM
Subject: Re: [GWN] line breaks when reading .brf files
Hi,
Go to the word processor and open a document. Then, go to read, then
settings, and arrow through the settings until you find reading mode. It
will be set to original. Press space and it will be set to compressed.
Remember this setting change will not be saved when you exit the document.
Don
On 9/29/2009 2:53 PM, Tessa wrote:
Where is the compressed reading mode,
I think I went through all the menu items particularly in the read menu
and
can't find it.
Or does it only apply to .brl documents or something.
Thanks
Tessa
----- Original Message -----
From: "don bishop"<[email protected]>
To:<[email protected]>
Sent: Tuesday, September 29, 2009 2:42 PM
Subject: Re: [GWN] line breaks when reading .brf files
Thanks Terri.
I wasn't sure of all the ramifications of using the compressed format,
but it looks like that's the best option at the moment. It really is
unfortunate that you can't save the setting for the document though.
I do understand that significant improvements/enhancements are planned
for the word processor at some point and I hope the ability to save
settings will be among them.
Don
On 9/29/2009 11:35 AM, Terri Pannett wrote:
Hi, Don,
The compressed read-only mode will allow you to read a document without
seeing the line breaks. The drawback of compressed read-only mode is you
cannot edit the document.
There are two other menu items which might be helpful to you. You can
turn off format markers. You'll still have the short lines when reading
the document in the original mode, but you won't see the marker. The
other option is to turn on the "skip blank lines." You can go line by
line and the BrailleSense will automatically skip blank lines.
But, no matter which mode you use, the BrailleSense will still see line
breaks as paragraph boundaries, so you cannot scroll from paragraph to
paragraph in .brf documents. This is a drawback and an annoyance to me.
The only work-around for this is to use the search command and look for
two spaces.
When you close your document, the compressed read-only settings won't be
saved, so you must activate them every time you open the document.
Terri Amateur Radio call sign KF6CA.
----- Original Message ----- From: "don bishop"<[email protected]>
To:<[email protected]>
Sent: Monday, September 28, 2009 8:45 PM
Subject: [GWN] line breaks when reading .brf files
Hi all,
Sure been quiet around here lately. I'm reading a .brf file from
bookshare on by braillesense plus. It is reading just fine except that
every other line has 32 characters of braille and the other lines have
8 or so. Obviously it's an issue with the line length within the .brf
file and the sense is splitting it with 32 characters on one braille
line of the display with the remaining characters of the line on the
next display. Is there any way to turn off the line break in the .brf
file so the sense won't see these? I don't see any such setting in the
bs command list, but I could be missing something too.
It's certainly not impossible to read this way, but it really would be
easier if each display line was filled.
Thanks,
Don
__________ Information from ESET NOD32 Antivirus, version of virus
signature database 4468 (20090929) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________ NOD32 4468 (20090929) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
__________ NOD32 4468 (20090929) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus
signature database 4468 (20090929) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com