Yes, but to avoid possible RX damage, you can just use a dummy load on the HackRF.
It’s odd that people interested in RX-only would spend the extra money instead of getting an RTL or FCD or AirSpy or SDRPlay or…. -Scott On Sep 23, 2015, at 4:59 PM, Toth, Gregory S <gregory.s.t...@boeing.com> wrote: > I assume that even without a license, it is ok to use a 50 ohm coax cable to > connect the Hack RF antenna jack directly to the input of an appropriate > receiver? Probably could use an inline attenuator just in case. > > From: HackRF-dev [mailto:hackrf-dev-boun...@greatscottgadgets.com] On Behalf > Of C Crane > Sent: Wednesday, September 23, 2015 1:58 PM > To: Chuck McManis > Cc: hackrf-dev@greatscottgadgets.com; Dana Shtun > Subject: Re: [Hackrf-dev] HackRF DX 100Km on 1296.1 > > Perhaps so. It just surprised me that there wasn't more overall interest. I > thought there would be more people playing with different modes and what not. > I guess I incorrectly assumed most of those with an interest in RF would also > probably be licensed. > > On Wed, Sep 23, 2015 at 3:55 PM, Chuck McManis <chuck.mcma...@gmail.com> > wrote: > On Wed, Sep 23, 2015 at 2:39 PM, C Crane <ccrane...@gmail.com> wrote: > > Unfortunately, nobody seems too interesting in transmitting. > > I think that is unfair. Perhaps it is more accurate that the Majority > of HackRF owners are not licensed to transmit, and so they don't. > Because there is tremendous value and fun to be had just on the > receiving side. > > _______________________________________________ > HackRF-dev mailing list > HackRF-dev@greatscottgadgets.com > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
_______________________________________________ HackRF-dev mailing list HackRF-dev@greatscottgadgets.com https://pairlist9.pair.net/mailman/listinfo/hackrf-dev