We are almost there, now remains the linkage part to pass.
In your /opt/deviceatlas-enterprise-c-3.2 folder, there should be a
`include` and a `lib` or a `lib64` folder
So for the last command, what needs to be done instead is one of the
following (no need to repeat step 1) :
make TARGET=linux-glibc USE_PCRE=1 USE_OPENSSL=1 USE_ZLIB=1
USE_DEVICEATLAS=1 DEVICEATLAS_INC=/opt/deviceatlas-enterprise-c-3.2/include
DEVICEATLAS_LIB=/opt/deviceatlas-enterprise-c-3.2/lib
DEVICEATLAS_LDFLAGS="-L/opt/deviceatlas-enterprise-c-3.2/lib
-Wl,-rpath,/opt/deviceatlas-enterprise-c-3.2/lib -lda"
or
make TARGET=linux-glibc USE_PCRE=1 USE_OPENSSL=1 USE_ZLIB=1
USE_DEVICEATLAS=1 DEVICEATLAS_INC=/opt/deviceatlas-enterprise-c-3.2/include
DEVICEATLAS_LIB=/opt/deviceatlas-enterprise-c-3.2/lib64
DEVICEATLAS_LDFLAGS="-L/opt/deviceatlas-enterprise-c-3.2/lib64
-Wl,-rpath,/opt/deviceatlas-enterprise-c-3.2/lib64 -lda"
The only difference is `lib` vs `lib64`
Hope it's useful.
Kindest regards.
On Tue, 19 Sept 2023 at 12:52, Mahendra Patil <mahendra.pa...@naaptol.com>
wrote:
>
> 1)
> cd /opt/deviceatlas-enterprise-c-3.2
> cmake . -DCMAKE_INSTALL_PREFIX=/opt/deviceatlas-enterprise-c-3.2
> -DCMAKE_C_FLAGS="-std=gnu99"
> make
> make install
>
> 2)
> cd haproxy-2.8.3
> make TARGET=linux-glibc USE_PCRE=1 USE_OPENSSL=1 USE_ZLIB=1
> USE_DEVICEATLAS=1 DEVICEATLAS_INC=/opt/deviceatlas-enterprise-c-3.2/include
> DEVICEATLAS_LIB=/opt/deviceatlas-enterprise-c-3.2/lib
>
> LD haproxy
> /usr/bin/ld: cannot find -lda
> collect2: error: ld returned 1 exit status
> make: *** [haproxy] Error 1
>
>
>
>
>
> On Tue, Sep 19, 2023 at 10:19 AM David CARLIER <devne...@gmail.com> wrote:
>
>> Hi,
>>
>> Since you build the DeviceAtlas library from cmake prior, the following
>> steps are more appropriate :
>> 1/ Inside the deviceatlas-enterprise-c-3.2 folder
>> cmake . -DCMAKE_INSTALL_PREFIX=/opt/deviceatlas-enterprise-c-3.2
>> -DCMAKE_C_FLAGS="-std=gnu99"
>> make
>> make install
>>
>> 2/ Inside the haproxy-2.8.3 folder
>>
>> make TARGET=linux-glibc USE_PCRE=1 USE_OPENSSL=1 USE_ZLIB=1
>> USE_DEVICEATLAS=1 DEVICEATLAS_INC=/opt/deviceatlas-enterprise-c-3.2/include
>> DEVICEATLAS_LIB=/opt/deviceatlas-enterprise-c-3.2/lib
>>
>> Let me know if you have any further question.
>>
>> On Tue, 19 Sept 2023 at 00:02, Mahendra Patil <mahendra.pa...@naaptol.com>
>> wrote:
>>
>>> Thanks for yours prompt reply about deviceatlas-enterprise-c-3.2 error
>>> while make
>>> after yours suggestion deviceatlas-enterprise-c-3.2 *make *works fine
>>>
>>> But while using with haproxy-2.8.3 version gives following error
>>>
>>> [root@govinda opt]# cd haproxy-2.8.3
>>> [root@govinda haproxy-2.8.3]# make TARGET=linux-glibc USE_PCRE=1
>>> USE_OPENSSL=1 USE_ZLIB=1 USE_DEVICEATLAS=1
>>> DEVICEATLAS_SRC=/opt/deviceatlas-enterprise-c-3.2/Src/
>>> CC src/ev_poll.o
>>> CC src/ev_epoll.o
>>> CC src/cpuset.o
>>> CC src/ssl_sock.o
>>> CC src/ssl_ckch.o
>>> CC src/ssl_sample.o
>>> CC src/ssl_crtlist.o
>>> CC src/cfgparse-ssl.o
>>> CC src/ssl_utils.o
>>> CC src/jwt.o
>>> CC src/ssl_ocsp.o
>>> CC /opt/deviceatlas/Src//Os/daunix.o
>>> CC /opt/deviceatlas/Src//dadwcom.o
>>> CC /opt/deviceatlas/Src//dasch.o
>>> CC /opt/deviceatlas/Src//json.o
>>> CC /opt/deviceatlas/Src//dac.o
>>> /opt/deviceatlas/Src//dac.c:1033:0: warning: ignoring #pragma optimize
>>> [-Wunknown-pragmas]
>>> #pragma optimize("Ofast")
>>> ^
>>> /opt/deviceatlas/Src//dac.c:1041:0: warning: ignoring #pragma optimize
>>> [-Wunknown-pragmas]
>>> #pragma optimize("Ofast")
>>> ^
>>> /opt/deviceatlas/Src//dac.c:1049:0: warning: ignoring #pragma optimize
>>> [-Wunknown-pragmas]
>>> #pragma optimize("Ofast")
>>> ^
>>> /opt/deviceatlas/Src//dac.c:1057:0: warning: ignoring #pragma optimize
>>> [-Wunknown-pragmas]
>>> #pragma optimize("Ofast")
>>> ^
>>> /opt/deviceatlas/Src//dac.c:1065:0: warning: ignoring #pragma optimize
>>> [-Wunknown-pragmas]
>>> #pragma optimize("Ofast")
>>> ^
>>> /opt/deviceatlas/Src//dac.c:1076:0: warning: ignoring #pragma optimize
>>> [-Wunknown-pragmas]
>>> #pragma optimize("Ofast")
>>> ^
>>> /opt/deviceatlas/Src//dac.c: In function ârun_san_evidenceâ:
>>> /opt/deviceatlas/Src//dac.c:1404:23: warning: unused variable âeâ
>>> [-Wunused-variable]
>>> char *o, *e, *optr, *ptr;
>>> ^
>>> /opt/deviceatlas/Src//dac.c:1393:22: warning: unused variable âeâ
>>> [-Wunused-variable]
>>> char *text, *e;
>>> ^
>>> /opt/deviceatlas/Src//dac.c: In function ârun_props_rulesâ:
>>> /opt/deviceatlas/Src//dac.c:2143:24: warning: missing braces around
>>> initializer [-Wmissing-braces]
>>> struct da_lkp_handler tmpch = {0};
>>> ^
>>> /opt/deviceatlas/Src//dac.c:2143:24: warning: (near initialization for
>>> âtmpch.evidâ) [-Wmissing-braces]
>>> /opt/deviceatlas/Src//dac.c:1984:19: warning: unused variable âeâ
>>> [-Wunused-variable]
>>> char *o, *e, *ptr, *optr;
>>> ^
>>> /opt/deviceatlas/Src//dac.c:1983:38: warning: unused variable âedâ
>>> [-Wunused-variable]
>>> char *tmpkp, *tmpvp, *sptr, *ed;
>>> ^
>>> /opt/deviceatlas/Src//dac.c: In function ârun_dyn_rulesâ:
>>> /opt/deviceatlas/Src//dac.c:2192:13: error: âforâ loop initial
>>> declarations are only allowed in C99 mode
>>> for (size_t gt = 0; gt < result->fl[lvl]->yszcount; gt ++) {
>>> ^
>>> compilation terminated due to -Wfatal-errors.
>>> make: *** [/opt/deviceatlas/Src//dac.o] Error 1
>>>
>>>
>>> Additionally haproxy-2.8.3 version we check
>>> with deviceatlas-enterprise-c-2.4.1 version no issue observe , So let us
>>> know is there any concern with deviceatlas-enterprise-c-3.2 version
>>>
>>> --mahen
>>>
>>> On Mon, Sep 18, 2023 at 11:22 PM David CARLIER <devne...@gmail.com>
>>> wrote:
>>>
>>>> Hi and thanks for your report.
>>>>
>>>> Would the following works for you (recommended to work a
>>>> fresh extracted directory) ?
>>>>
>>>> `cmake . -DCMAKE_INSTALL_PREFIX=/opt/deviceatlas-enterprise-c-3.2
>>>> -DCMAKE_C_FLAGS="-std=gnu99"`
>>>>
>>>>
>>>> On Mon, 18 Sept 2023 at 18:45, Amol Arote <amol.ar...@naaptol.com>
>>>> wrote:
>>>>
>>>>> Dear Team,
>>>>>
>>>>> We are trying to upgrade/install deviceatlas-enterprise-c-3.2 , but
>>>>> while compiling deviceatlas its showing some error.
>>>>> Below are the steps which we performed and occured error for the same.
>>>>>
>>>>> *Device Atlas Version :* deviceatlas-enterprise-c-3.2
>>>>>
>>>>> [root@govinda opt]# cd /opt/deviceatlas-enterprise-c-3.2/Src/
>>>>> [root@govinda Src]# cmake .
>>>>> -DCMAKE_INSTALL_PREFIX=/opt/deviceatlas-enterprise-c-3.2
>>>>> -- The C compiler identification is GNU 4.8.5
>>>>> -- The CXX compiler identification is GNU 4.8.5
>>>>> -- Check for working C compiler: /usr/bin/cc
>>>>> -- Check for working C compiler: /usr/bin/cc -- works
>>>>> -- Detecting C compiler ABI info
>>>>> -- Detecting C compiler ABI info - done
>>>>> -- Check for working CXX compiler: /usr/bin/c++
>>>>> -- Check for working CXX compiler: /usr/bin/c++ -- works
>>>>> -- Detecting CXX compiler ABI info
>>>>> -- Detecting CXX compiler ABI info - done
>>>>> -- Found CURL: /usr/lib64/libcurl.so (found version "7.29.0")
>>>>> -- Found ZLIB: /usr/lib64/libz.so (found version "1.2.7")
>>>>> -- Performing Test HAVE_BUILTIN__BOOL
>>>>> -- Performing Test HAVE_BUILTIN__BOOL - Success
>>>>> -- Found OpenSSL: /usr/lib64/libssl.so;/usr/lib64/libcrypto.so (found
>>>>> version "1.0.2k")
>>>>> -- Found OpenSSL MD5
>>>>> -- Performing Test HAS_CURLSSLSET
>>>>> -- Performing Test HAS_CURLSSLSET - Failed
>>>>> -- Could NOT find ZIP
>>>>> -- Performing Test HAS_STD_ATOMICS
>>>>> -- Performing Test HAS_STD_ATOMICS - Failed
>>>>> -- Performing Test HAS_BUILTIN_ATOMICS
>>>>> -- Performing Test HAS_BUILTIN_ATOMICS - Success
>>>>> -- Performing Test HAS_ATTR_COLD
>>>>> -- Performing Test HAS_ATTR_COLD - Success
>>>>> -- Performing Test HAS_ATTR_ALLOC
>>>>> -- Performing Test HAS_ATTR_ALLOC - Failed
>>>>> -- Performing Test HAS_ATTR_NOSANITIZE
>>>>> -- Performing Test HAS_ATTR_NOSANITIZE - Success
>>>>> -- Performing Test HAS_BUILTIN_EXPECT
>>>>> -- Performing Test HAS_BUILTIN_EXPECT - Success
>>>>> -- Performing Test HAS_WIN32_ATOMICS
>>>>> -- Performing Test HAS_WIN32_ATOMICS - Failed
>>>>> -- Performing Test HAS_WIN32_ATTR_ALLOC
>>>>> -- Performing Test HAS_WIN32_ATTR_ALLOC - Failed
>>>>> -- Performing Test HAS_WIN32_UNUSED
>>>>> -- Performing Test HAS_WIN32_UNUSED - Failed
>>>>> -- version
>>>>> -- Configuring done
>>>>> -- Generating done
>>>>> -- Build files have been written to:
>>>>> /opt/deviceatlas-enterprise-c-3.2/Src
>>>>>
>>>>> [image: image.png]
>>>>>
>>>>>
>>>>> [root@govinda Src]# make
>>>>> Scanning dependencies of target ci
>>>>> [ 6%] Building C object CMakeFiles/ci.dir/ci.c.o
>>>>> [ 13%] Building C object CMakeFiles/ci.dir/dadwcom.c.o
>>>>> [ 20%] Building C object CMakeFiles/ci.dir/dadwcurl.c.o
>>>>> [ 26%] Building C object CMakeFiles/ci.dir/dadwarc.c.o
>>>>> [ 33%] Building C object CMakeFiles/ci.dir/cisch.c.o
>>>>> [ 40%] Building C object CMakeFiles/ci.dir/Os/ciunix.c.o
>>>>> Linking C shared library libci.so
>>>>> [ 40%] Built target ci
>>>>> Scanning dependencies of target da
>>>>> [ 46%] Building C object CMakeFiles/da.dir/Arch/amd64.c.o
>>>>> [ 53%] Building C object CMakeFiles/da.dir/json.c.o
>>>>> [ 60%] Building C object CMakeFiles/da.dir/dac.c.o
>>>>> /opt/deviceatlas-enterprise-c-3.2/Src/dac.c: In function
>>>>> ârun_dyn_rulesâ:
>>>>> /opt/deviceatlas-enterprise-c-3.2/Src/dac.c:2192:13: error: âforâ loop
>>>>> initial declarations are only allowed in C99 mode
>>>>> for (size_t gt = 0; gt < result->fl[lvl]->yszcount; gt
>>>>> ++) {
>>>>> ^
>>>>> /opt/deviceatlas-enterprise-c-3.2/Src/dac.c:2192:13: note: use option
>>>>> -std=c99 or -std=gnu99 to compile your code
>>>>> make[2]: *** [CMakeFiles/da.dir/dac.c.o] Error 1
>>>>> make[1]: *** [CMakeFiles/da.dir/all] Error 2
>>>>> make: *** [all] Error 2
>>>>> [root@govinda Src]#
>>>>>
>>>>> [image: image.png]
>>>>>
>>>>> Regards,
>>>>>
>>>>>
>>>>>
>>>>> Amol Arote
>>>>>
>>>>> Senior IT Manager
>>>>>
>>>>>
>>>>>
>>>>> *Mobile*: 9773868585 | 8097988585
>>>>>
>>>>> *Phone:* (022) 61934700 Ext 444
>>>>>
>>>>> *Email:* amol.ar...@naaptol.com
>>>>>
>>>>> *Web:* *https://www.naaptol.com <https://www.naaptol.com>*
>>>>>
>>>>>
>>>>>
>>>>>
>>>
>
