So the 20230802_compact.json only works with v2 versions, even from the
page here it is still the case.
Your inquiry had been acknowledged by the dev team but I can't say exactly
when the new v3 version will be available.
But we ll keep you posted.
Kindest regards.
On Wed, 20 Sept 2023 at 23:50, Mahendra Patil <mahendra.pa...@naaptol.com>
wrote:
> *After installation haproxy not able to start , show below error*
>
> [root@govinda opt]# /opt/haproxy-ssl/sbin/haproxy -f
> /opt/haproxy-ssl/conf/haproxy.cfg
> [NOTICE] (42915) : haproxy version is 2.8.3-86e043a
> [NOTICE] (42915) : path to executable is /opt/haproxy-ssl/sbin/haproxy
> [ALERT] (42915) : config : deviceatlas :
> '/opt/deviceatlas/20230802_compact.json' json file is invalid.
>
> On Tue, Sep 19, 2023 at 5:36 PM David CARLIER <devne...@gmail.com> wrote:
>
>> We are almost there, now remains the linkage part to pass.
>> In your /opt/deviceatlas-enterprise-c-3.2 folder, there should be a
>> `include` and a `lib` or a `lib64` folder
>> So for the last command, what needs to be done instead is one of the
>> following (no need to repeat step 1) :
>>
>> make TARGET=linux-glibc USE_PCRE=1 USE_OPENSSL=1 USE_ZLIB=1
>> USE_DEVICEATLAS=1 DEVICEATLAS_INC=/opt/deviceatlas-enterprise-c-3.2/include
>> DEVICEATLAS_LIB=/opt/deviceatlas-enterprise-c-3.2/lib
>> DEVICEATLAS_LDFLAGS="-L/opt/deviceatlas-enterprise-c-3.2/lib
>> -Wl,-rpath,/opt/deviceatlas-enterprise-c-3.2/lib -lda"
>>
>> or
>>
>> make TARGET=linux-glibc USE_PCRE=1 USE_OPENSSL=1 USE_ZLIB=1
>> USE_DEVICEATLAS=1 DEVICEATLAS_INC=/opt/deviceatlas-enterprise-c-3.2/include
>> DEVICEATLAS_LIB=/opt/deviceatlas-enterprise-c-3.2/lib64
>> DEVICEATLAS_LDFLAGS="-L/opt/deviceatlas-enterprise-c-3.2/lib64
>> -Wl,-rpath,/opt/deviceatlas-enterprise-c-3.2/lib64 -lda"
>>
>> The only difference is `lib` vs `lib64`
>>
>> Hope it's useful.
>>
>> Kindest regards.
>>
>>
>>
>> On Tue, 19 Sept 2023 at 12:52, Mahendra Patil <mahendra.pa...@naaptol.com>
>> wrote:
>>
>>>
>>> 1)
>>> cd /opt/deviceatlas-enterprise-c-3.2
>>> cmake . -DCMAKE_INSTALL_PREFIX=/opt/deviceatlas-enterprise-c-3.2
>>> -DCMAKE_C_FLAGS="-std=gnu99"
>>> make
>>> make install
>>>
>>> 2)
>>> cd haproxy-2.8.3
>>> make TARGET=linux-glibc USE_PCRE=1 USE_OPENSSL=1 USE_ZLIB=1
>>> USE_DEVICEATLAS=1 DEVICEATLAS_INC=/opt/deviceatlas-enterprise-c-3.2/include
>>> DEVICEATLAS_LIB=/opt/deviceatlas-enterprise-c-3.2/lib
>>>
>>> LD haproxy
>>> /usr/bin/ld: cannot find -lda
>>> collect2: error: ld returned 1 exit status
>>> make: *** [haproxy] Error 1
>>>
>>>
>>>
>>>
>>>
>>> On Tue, Sep 19, 2023 at 10:19 AM David CARLIER <devne...@gmail.com>
>>> wrote:
>>>
>>>> Hi,
>>>>
>>>> Since you build the DeviceAtlas library from cmake prior, the following
>>>> steps are more appropriate :
>>>> 1/ Inside the deviceatlas-enterprise-c-3.2 folder
>>>> cmake . -DCMAKE_INSTALL_PREFIX=/opt/deviceatlas-enterprise-c-3.2
>>>> -DCMAKE_C_FLAGS="-std=gnu99"
>>>> make
>>>> make install
>>>>
>>>> 2/ Inside the haproxy-2.8.3 folder
>>>>
>>>> make TARGET=linux-glibc USE_PCRE=1 USE_OPENSSL=1 USE_ZLIB=1
>>>> USE_DEVICEATLAS=1 DEVICEATLAS_INC=/opt/deviceatlas-enterprise-c-3.2/include
>>>> DEVICEATLAS_LIB=/opt/deviceatlas-enterprise-c-3.2/lib
>>>>
>>>> Let me know if you have any further question.
>>>>
>>>> On Tue, 19 Sept 2023 at 00:02, Mahendra Patil <
>>>> mahendra.pa...@naaptol.com> wrote:
>>>>
>>>>> Thanks for yours prompt reply about deviceatlas-enterprise-c-3.2
>>>>> error while make
>>>>> after yours suggestion deviceatlas-enterprise-c-3.2 *make *works fine
>>>>>
>>>>> But while using with haproxy-2.8.3 version gives following error
>>>>>
>>>>> [root@govinda opt]# cd haproxy-2.8.3
>>>>> [root@govinda haproxy-2.8.3]# make TARGET=linux-glibc USE_PCRE=1
>>>>> USE_OPENSSL=1 USE_ZLIB=1 USE_DEVICEATLAS=1
>>>>> DEVICEATLAS_SRC=/opt/deviceatlas-enterprise-c-3.2/Src/
>>>>> CC src/ev_poll.o
>>>>> CC src/ev_epoll.o
>>>>> CC src/cpuset.o
>>>>> CC src/ssl_sock.o
>>>>> CC src/ssl_ckch.o
>>>>> CC src/ssl_sample.o
>>>>> CC src/ssl_crtlist.o
>>>>> CC src/cfgparse-ssl.o
>>>>> CC src/ssl_utils.o
>>>>> CC src/jwt.o
>>>>> CC src/ssl_ocsp.o
>>>>> CC /opt/deviceatlas/Src//Os/daunix.o
>>>>> CC /opt/deviceatlas/Src//dadwcom.o
>>>>> CC /opt/deviceatlas/Src//dasch.o
>>>>> CC /opt/deviceatlas/Src//json.o
>>>>> CC /opt/deviceatlas/Src//dac.o
>>>>> /opt/deviceatlas/Src//dac.c:1033:0: warning: ignoring #pragma optimize
>>>>> [-Wunknown-pragmas]
>>>>> #pragma optimize("Ofast")
>>>>> ^
>>>>> /opt/deviceatlas/Src//dac.c:1041:0: warning: ignoring #pragma optimize
>>>>> [-Wunknown-pragmas]
>>>>> #pragma optimize("Ofast")
>>>>> ^
>>>>> /opt/deviceatlas/Src//dac.c:1049:0: warning: ignoring #pragma optimize
>>>>> [-Wunknown-pragmas]
>>>>> #pragma optimize("Ofast")
>>>>> ^
>>>>> /opt/deviceatlas/Src//dac.c:1057:0: warning: ignoring #pragma optimize
>>>>> [-Wunknown-pragmas]
>>>>> #pragma optimize("Ofast")
>>>>> ^
>>>>> /opt/deviceatlas/Src//dac.c:1065:0: warning: ignoring #pragma optimize
>>>>> [-Wunknown-pragmas]
>>>>> #pragma optimize("Ofast")
>>>>> ^
>>>>> /opt/deviceatlas/Src//dac.c:1076:0: warning: ignoring #pragma optimize
>>>>> [-Wunknown-pragmas]
>>>>> #pragma optimize("Ofast")
>>>>> ^
>>>>> /opt/deviceatlas/Src//dac.c: In function ârun_san_evidenceâ:
>>>>> /opt/deviceatlas/Src//dac.c:1404:23: warning: unused variable âeâ
>>>>> [-Wunused-variable]
>>>>> char *o, *e, *optr, *ptr;
>>>>> ^
>>>>> /opt/deviceatlas/Src//dac.c:1393:22: warning: unused variable âeâ
>>>>> [-Wunused-variable]
>>>>> char *text, *e;
>>>>> ^
>>>>> /opt/deviceatlas/Src//dac.c: In function ârun_props_rulesâ:
>>>>> /opt/deviceatlas/Src//dac.c:2143:24: warning: missing braces around
>>>>> initializer [-Wmissing-braces]
>>>>> struct da_lkp_handler tmpch = {0};
>>>>> ^
>>>>> /opt/deviceatlas/Src//dac.c:2143:24: warning: (near initialization for
>>>>> âtmpch.evidâ) [-Wmissing-braces]
>>>>> /opt/deviceatlas/Src//dac.c:1984:19: warning: unused variable âeâ
>>>>> [-Wunused-variable]
>>>>> char *o, *e, *ptr, *optr;
>>>>> ^
>>>>> /opt/deviceatlas/Src//dac.c:1983:38: warning: unused variable âedâ
>>>>> [-Wunused-variable]
>>>>> char *tmpkp, *tmpvp, *sptr, *ed;
>>>>> ^
>>>>> /opt/deviceatlas/Src//dac.c: In function ârun_dyn_rulesâ:
>>>>> /opt/deviceatlas/Src//dac.c:2192:13: error: âforâ loop initial
>>>>> declarations are only allowed in C99 mode
>>>>> for (size_t gt = 0; gt < result->fl[lvl]->yszcount; gt
>>>>> ++) {
>>>>> ^
>>>>> compilation terminated due to -Wfatal-errors.
>>>>> make: *** [/opt/deviceatlas/Src//dac.o] Error 1
>>>>>
>>>>>
>>>>> Additionally haproxy-2.8.3 version we check
>>>>> with deviceatlas-enterprise-c-2.4.1 version no issue observe , So let us
>>>>> know is there any concern with deviceatlas-enterprise-c-3.2 version
>>>>>
>>>>> --mahen
>>>>>
>>>>> On Mon, Sep 18, 2023 at 11:22 PM David CARLIER <devne...@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi and thanks for your report.
>>>>>>
>>>>>> Would the following works for you (recommended to work a
>>>>>> fresh extracted directory) ?
>>>>>>
>>>>>> `cmake . -DCMAKE_INSTALL_PREFIX=/opt/deviceatlas-enterprise-c-3.2
>>>>>> -DCMAKE_C_FLAGS="-std=gnu99"`
>>>>>>
>>>>>>
>>>>>> On Mon, 18 Sept 2023 at 18:45, Amol Arote <amol.ar...@naaptol.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Dear Team,
>>>>>>>
>>>>>>> We are trying to upgrade/install deviceatlas-enterprise-c-3.2 , but
>>>>>>> while compiling deviceatlas its showing some error.
>>>>>>> Below are the steps which we performed and occured error for the
>>>>>>> same.
>>>>>>>
>>>>>>> *Device Atlas Version :* deviceatlas-enterprise-c-3.2
>>>>>>>
>>>>>>> [root@govinda opt]# cd /opt/deviceatlas-enterprise-c-3.2/Src/
>>>>>>> [root@govinda Src]# cmake .
>>>>>>> -DCMAKE_INSTALL_PREFIX=/opt/deviceatlas-enterprise-c-3.2
>>>>>>> -- The C compiler identification is GNU 4.8.5
>>>>>>> -- The CXX compiler identification is GNU 4.8.5
>>>>>>> -- Check for working C compiler: /usr/bin/cc
>>>>>>> -- Check for working C compiler: /usr/bin/cc -- works
>>>>>>> -- Detecting C compiler ABI info
>>>>>>> -- Detecting C compiler ABI info - done
>>>>>>> -- Check for working CXX compiler: /usr/bin/c++
>>>>>>> -- Check for working CXX compiler: /usr/bin/c++ -- works
>>>>>>> -- Detecting CXX compiler ABI info
>>>>>>> -- Detecting CXX compiler ABI info - done
>>>>>>> -- Found CURL: /usr/lib64/libcurl.so (found version "7.29.0")
>>>>>>> -- Found ZLIB: /usr/lib64/libz.so (found version "1.2.7")
>>>>>>> -- Performing Test HAVE_BUILTIN__BOOL
>>>>>>> -- Performing Test HAVE_BUILTIN__BOOL - Success
>>>>>>> -- Found OpenSSL: /usr/lib64/libssl.so;/usr/lib64/libcrypto.so
>>>>>>> (found version "1.0.2k")
>>>>>>> -- Found OpenSSL MD5
>>>>>>> -- Performing Test HAS_CURLSSLSET
>>>>>>> -- Performing Test HAS_CURLSSLSET - Failed
>>>>>>> -- Could NOT find ZIP
>>>>>>> -- Performing Test HAS_STD_ATOMICS
>>>>>>> -- Performing Test HAS_STD_ATOMICS - Failed
>>>>>>> -- Performing Test HAS_BUILTIN_ATOMICS
>>>>>>> -- Performing Test HAS_BUILTIN_ATOMICS - Success
>>>>>>> -- Performing Test HAS_ATTR_COLD
>>>>>>> -- Performing Test HAS_ATTR_COLD - Success
>>>>>>> -- Performing Test HAS_ATTR_ALLOC
>>>>>>> -- Performing Test HAS_ATTR_ALLOC - Failed
>>>>>>> -- Performing Test HAS_ATTR_NOSANITIZE
>>>>>>> -- Performing Test HAS_ATTR_NOSANITIZE - Success
>>>>>>> -- Performing Test HAS_BUILTIN_EXPECT
>>>>>>> -- Performing Test HAS_BUILTIN_EXPECT - Success
>>>>>>> -- Performing Test HAS_WIN32_ATOMICS
>>>>>>> -- Performing Test HAS_WIN32_ATOMICS - Failed
>>>>>>> -- Performing Test HAS_WIN32_ATTR_ALLOC
>>>>>>> -- Performing Test HAS_WIN32_ATTR_ALLOC - Failed
>>>>>>> -- Performing Test HAS_WIN32_UNUSED
>>>>>>> -- Performing Test HAS_WIN32_UNUSED - Failed
>>>>>>> -- version
>>>>>>> -- Configuring done
>>>>>>> -- Generating done
>>>>>>> -- Build files have been written to:
>>>>>>> /opt/deviceatlas-enterprise-c-3.2/Src
>>>>>>>
>>>>>>> [image: image.png]
>>>>>>>
>>>>>>>
>>>>>>> [root@govinda Src]# make
>>>>>>> Scanning dependencies of target ci
>>>>>>> [ 6%] Building C object CMakeFiles/ci.dir/ci.c.o
>>>>>>> [ 13%] Building C object CMakeFiles/ci.dir/dadwcom.c.o
>>>>>>> [ 20%] Building C object CMakeFiles/ci.dir/dadwcurl.c.o
>>>>>>> [ 26%] Building C object CMakeFiles/ci.dir/dadwarc.c.o
>>>>>>> [ 33%] Building C object CMakeFiles/ci.dir/cisch.c.o
>>>>>>> [ 40%] Building C object CMakeFiles/ci.dir/Os/ciunix.c.o
>>>>>>> Linking C shared library libci.so
>>>>>>> [ 40%] Built target ci
>>>>>>> Scanning dependencies of target da
>>>>>>> [ 46%] Building C object CMakeFiles/da.dir/Arch/amd64.c.o
>>>>>>> [ 53%] Building C object CMakeFiles/da.dir/json.c.o
>>>>>>> [ 60%] Building C object CMakeFiles/da.dir/dac.c.o
>>>>>>> /opt/deviceatlas-enterprise-c-3.2/Src/dac.c: In function
>>>>>>> ârun_dyn_rulesâ:
>>>>>>> /opt/deviceatlas-enterprise-c-3.2/Src/dac.c:2192:13: error: âforâ
>>>>>>> loop initial declarations are only allowed in C99 mode
>>>>>>> for (size_t gt = 0; gt < result->fl[lvl]->yszcount; gt
>>>>>>> ++) {
>>>>>>> ^
>>>>>>> /opt/deviceatlas-enterprise-c-3.2/Src/dac.c:2192:13: note: use
>>>>>>> option -std=c99 or -std=gnu99 to compile your code
>>>>>>> make[2]: *** [CMakeFiles/da.dir/dac.c.o] Error 1
>>>>>>> make[1]: *** [CMakeFiles/da.dir/all] Error 2
>>>>>>> make: *** [all] Error 2
>>>>>>> [root@govinda Src]#
>>>>>>>
>>>>>>> [image: image.png]
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Amol Arote
>>>>>>>
>>>>>>> Senior IT Manager
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *Mobile*: 9773868585 | 8097988585
>>>>>>>
>>>>>>> *Phone:* (022) 61934700 Ext 444
>>>>>>>
>>>>>>> *Email:* amol.ar...@naaptol.com
>>>>>>>
>>>>>>> *Web:* *https://www.naaptol.com <https://www.naaptol.com>*
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>
>>>
>
