On Tue, 2005-10-18 at 20:19, Michael Spraggins wrote: > Finally, got pass step 41 but, I get this message at step 43, any ideas? > "Home device does not exist in the device file. Please contact your system > manager! Try Later" > > Do you have a hard drive ;)
Ruben > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > Sent: Tuesday, October 11, 2005 1:52 PM > To: hardhats-members@lists.sourceforge.net > Subject: Re: [Hardhats-members] Fileman - RPC not allowing new entry > > > Current 41. I would renumber it but I cannot automatically number so > changing > 110 numbers was not on my plate of To Dos. > > > > Now to create your own domain. From the VISTA prompt, start VA FileMan by > typing "D Q^DI". At the Select OPTION: prompt. Type "1". (You can see why you > typed 1 if you type "??" at the option prompt. That will give you the list of > options you can choose from and 1 is ENTER OR EDIT FILE ENTRIES.) At INPUT TO > WHAT FILE: type "DOMAIN" and accept the ALL// default to EDIT WHICH FIELD. At > Select DOMAIN NAME: enter a local domain name. Substitute an appropriate > value for VISTA.MYDOMAIN.COM in the example below. > > NB: If you are prompted for an ACCESS CODE, press ENTER until you get back > to a simple prompt and enter "S DUZ=1" before running > "D Q^DI". > > > > Select OPTION: 1 ENTER OR EDIT FILE ENTRIES > > > INPUT TO WHAT FILE: NEW PERSON// DOMAIN > EDIT WHICH FIELD: ALL// > > > Select DOMAIN NAME: VISTA.MYDOMAIN.COM > Are you adding 'VISTA.MYDOMAIN.COM' as > a new DOMAIN (the 2ND)? No// Y (Yes) > FLAGS: ^ > > > Select DOMAIN NAME: > > On Tuesday 11 October 2005 02:36 pm, David Sommers wrote: > Step 41 is very complicated and the two "notes" are not separated well, > I'll try changing those two around... > > Within step 41, it reads this: > > ----------------------------------------------------------------- > > N.B. If you are prompted for an ACCESS CODE, you will need to skip > ahead to the section "Set Yourself Up as the System Manager", steps > 49-78, and do that first. Then return to this step and use the ACCESS > CODE you gave the System Manager. > > ----------------------------------------------------------------- > > That's confusing; so I added this note which is much quicker: > > You can also try typing S DUZ=1 before entering into D Q^DI > > > > I'll make that cleaner right now. > > /David. > > > David Sommers, Architect | Dialog Medical > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Michael Spraggins > Sent: Tuesday, October 11, 2005 2:14 PM > To: hardhats-members@lists.sourceforge.net > Subject: RE: [Hardhats-members] Fileman - RPC not allowing new entry > > I'm having simular problem, I get through step 41, however I'm unable to > create an access code. > It states this task can be completed via step 49 but, not sure where > that step actually start/ed. > Thanks > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > Sent: Tuesday, October 11, 2005 10:50 AM > To: hardhats-members@lists.sourceforge.net > Subject: RE: [Hardhats-members] Fileman - RPC not allowing new entry > > > Sorry Nancy - that's not it either. I already created that domain > already in step 41. So my domain "VISTA.DIALOGMEDICAL.COM" is listed > when you ??. > > My output matches step 48, that's where I was. Trying to add in a new > RPC BROKER SITE. > > > David Sommers, Architect | Dialog Medical > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Nancy > Anthracite > Sent: Monday, October 10, 2005 7:06 PM > To: hardhats-members@lists.sourceforge.net > Subject: Re: [Hardhats-members] Fileman - RPC not allowing new entry > > You know, I should have tumbled to where he was making the change. I > was just > looking at step 41 in the installation instructions on Hardhats and > wondering > why it wasn't working. Now I see he wasn't doing the same thing! > > > 41. Now to create your own domain. From the VISTA prompt, start VA > FileMan by > typing "D Q^DI". At the Select OPTION: prompt. Type "1". (You can see > why you > typed 1 if you type "??" at the option prompt. That will give you the > list of > options you can choose from and 1 is ENTER OR EDIT FILE ENTRIES.) At > INPUT TO > WHAT FILE: type "DOMAIN" and accept the ALL// default to EDIT WHICH > FIELD. At > Select DOMAIN NAME: enter a local domain name. Substitute an appropriate > > value for VISTA.MYDOMAIN.COM in the example below. > > NB: If you are prompted for an ACCESS CODE, press ENTER until you get > back > to a simple prompt and enter "S DUZ=1" before running > "D Q^DI". > > > Select OPTION: 1 ENTER OR EDIT FILE ENTRIES > > > INPUT TO WHAT FILE: NEW PERSON// DOMAIN > EDIT WHICH FIELD: ALL// > > > Select DOMAIN NAME: VISTA.MYDOMAIN.COM > Are you adding 'VISTA.MYDOMAIN.COM' as > a new DOMAIN (the 2ND)? No// Y (Yes) > FLAGS: ^ > > > Select DOMAIN NAME: > > On Monday 10 October 2005 06:53 pm, Roy Gaber wrote: > Select OPTION: 8 DATA DICTIONARY UTILITIES > Select DATA DICTIONARY UTILITY OPTION: LIST FILE ATTRIBUTES > START WITH WHAT FILE: REMOTE PROCEDURE// RPC BROKER SITE PARAMETERS > (1 entry) > GO TO WHAT FILE: RPC BROKER SITE PARAMETERS// > Select SUB-FILE: > Select LISTING FORMAT: STANDARD// > Start with field: FIRST// > DEVICE: CONSOLE Right Margin: 80// > STANDARD DATA DICTIONARY #8994.1 -- RPC BROKER SITE PARAMETERS FILE > OCT 10,[EMAIL > PROTECTED]:52:50 > PAGE 1 > STORED IN ^XWB(8994.1, (1 ENTRY) SITE: Vista-Office EHR UCI: > EHR,EHR > (VERSI > ON 1.1) > > DATA NAME GLOBAL DATA > ELEMENT TITLE LOCATION TYPE > ------------------------------------------------------------------------ > ---- > --- > This file holds the site parameters for this installation of the RPC > Broker. > It will have only one entry -- the domain name of the installation site. > ^^^^^^^^^^^^^^ > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of David > Sommers > Sent: Monday, October 10, 2005 5:39 PM > To: hardhats-members@lists.sourceforge.net > Subject: RE: [Hardhats-members] Fileman - RPC not allowing new entry > > No I haven't. Is there something online that I can read up on or a > ROUTINE that I can dig into? > > > David Sommers, Architect | Dialog Medical > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Gregory Woodhouse > Sent: Monday, October 10, 2005 5:11 PM > To: hardhats-members@lists.sourceforge.net > Subject: Re: [Hardhats-members] Fileman - RPC not allowing new entry > > On Oct 10, 2005, at 2:04 PM, Nancy Anthracite wrote: > > David, try replacing the domain instead of making a new one - i.e., > > after > > choose the domain you have, and then after the //, put the new name. > > > > On Monday 10 October 2005 04:08 pm, David Sommers wrote: > > Anyone ever get this? > > > > > > > > Select RPC BROKER SITE PARAMETERS DOMAIN NAME: VISTA.DIALOGMEDICAL.COM > > > > Are you adding 'VISTA.DIALOGMEDICAL.COM' as > > > > a new RPC BROKER SITE PARAMETERS (the 2ND)? No// Y (Yes) ?? > > Have you tried looking up the input transform? There are a lot of > possibilities here: I've seen input transforms checking for "magic" > variables, looking to see if you hold a key, checking system > parameters, etc. Basically, it can do anything you can program. > > === > Gregory Woodhouse > [EMAIL PROTECTED] > > "Design quality doesn't ensure success, but design failure can ensure > failure." > > --Kent Beck > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: > Power Architecture Resource Center: Free content, downloads, > discussions, > and more. http://solutions.newsforge.com/ibmarch.tmpl > _______________________________________________ > Hardhats-members mailing list > Hardhats-members@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/hardhats-members > > > ------------------------------------------------------- > This SF.Net email is sponsored by: > Power Architecture Resource Center: Free content, downloads, > discussions, > and more. http://solutions.newsforge.com/ibmarch.tmpl > _______________________________________________ > Hardhats-members mailing list > Hardhats-members@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/hardhats-members > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: > Power Architecture Resource Center: Free content, downloads, > discussions, > and more. http://solutions.newsforge.com/ibmarch.tmpl > _______________________________________________ > Hardhats-members mailing list > Hardhats-members@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/hardhats-members ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Hardhats-members mailing list Hardhats-members@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hardhats-members
