Oopps... I always forget :-) Will try that.
-Jiri
---------- Původní zpráva ----------
Od: Jakub Jermar
Komu: HelenOS development mailing list <[email protected]>
Datum: 4. 7. 2014 14:12:34
Předmět: Re: [HelenOS-devel] Testing rtl8169
"I'd try running this test with a UP build, if you haven't already.
Jakub
On 4.7.2014 14:09, Jiri Svoboda wrote:
> Hi Agniezka et al,
>
> I tried the rtl8169 driver on my workstation Kvadrat. The first thing I
> encountered was a problem with compilation - I tried compiling for ia32,
> but that failed. I've yet to compile a 64-bit compiler. So I
> fixed/worked around the compilation issues and booted the system.
>
> The driver did not attach - I found out that my Realtek is a RTL8168,
> PCI VID:PID is 10EC:8168. I added those to the .ma file and booted
> again. The drivrer attached and correctly read out the MAC address. I
> connected via a cable to my laptop and ran Wireshark on the other side.
> Configured an IP address and tried pinging.
>
> The result: frames were properly being sent (Wireshark saw them), but
> the responses were apparently not being received. Unfortunately I did
> not have the time to dig deeper into it.
>
> Would you expect this kind of behavior if the driver did not receive any
> interrupts at all? Or would it not work at all?
>
> Given that USB is not working on that machine and I am sometimes getting
> 'spurious interrupt' messages for keypresses (currently only if the
> system does not boot all the way to the desktop), it could be a problem
> with interrupt handling on my machine, rather than with the driver.
>
> Best regards,
> Jiri
>
>
>
> _______________________________________________
> HelenOS-devel mailing list
> [email protected]
> http://lists.modry.cz/listinfo/helenos-devel
>
_______________________________________________
HelenOS-devel mailing list
[email protected]
http://lists.modry.cz/listinfo/helenos-devel"
_______________________________________________
HelenOS-devel mailing list
[email protected]
http://lists.modry.cz/listinfo/helenos-devel