Hi, I have a 3Com 3c905C-TX [Tornado] that I believe it is compatible with GNU Mach and OSKit-Mach vortex driver, but it never works in Hurd (I already use it on NetBSD, FreeBSD and Linux... the NIC had a similar problem with linux < 2.2.17).
On GNU Mach, the device seem it is running because there is an eth0, then I set translator pfinet, but I can't ping the gateway server. It is like this (as it happens this was on bochs, but is the same): hurd:~# ping 161.24.72.1 PING 161.24.72.1 (161.24.72.1): 56 data bytes 64 bytes from 161.24.73.87: Destination Host Unreachable Vr HL TOS Len ID Flg off TTL Pro cks Src Dst Data 4 5 c0 8400 0200 0 0000 ff 01 d7e5 161.24.73.87 161.24.73.87 64 bytes from 161.24.73.87: Destination Host Unreachable Vr HL TOS Len ID Flg off TTL Pro cks Src Dst Data 4 5 c0 8400 0300 0 0000 ff 01 d6e5 161.24.73.87 161.24.73.87 ^C--- 161.24.72.1 ping statistics --- 4 packets transmitted, 0 packets received, 100% packet loss hurd:~# On OSKit-Mach, that I compile from CVS, when boot it show a common message of device drive but no eth0 device probed. The translator die before any ping. I change my NIC by a friend's one (RealTek RTL8139C) and try GNU Mach only... All works fine!!! I like to try anything before think in buy other NIC. Somebody knows what is happens? -- Ciro Cavani <[EMAIL PROTECTED]> Instituto Tecnol�gico de Aeron�utica _______________________________________________ Help-hurd mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/help-hurd
