Hi Deanne - Hope this will help For our Ventana Ultra, we use Leica / Surgipath Apex Superior Adhesive slides. We use de ionized water in our baths at 45C ish, no additives. We never "double-dip" our slides (meaning that if we mount a control on the top of the slide, we turn the slide upside down to pick it up, only immersing the slide to pick up the intended tissue) We pre-bake IHC slides in a hot air blower over at 65C, 10 min for small tissues, and 1 hr for large tissues, then load for IHC.
For special stains, we use the same slides, but they go directly on the Sakura Prisma stainer into the instrument oven at 65C for 15 minutes before staining For H&E, we use the plain Surgipath Snowcoat slides, no adhesive, directly on the Sakura Prisma stainer into the instrument oven at 65C for 15 minutes before staining. They dry vertically in a rack as we cut, then we load as soon as the rack is full. We once had an issue with tissue falling off and were able to trace it to a new tech's liberal use of Paraguard Spray. Stopped using it, wiped everything down with alcohol and our problem went away. Also, many years ago, I had a problem with a bad lot of slides, but these were Cardinal's. I sincerely hope you can get this straightened out. I know how frustrating such a problem can be. Terri Terri L. Braud, HT(ASCP) Anatomic Pathology Supervisor Laboratory Holy Redeemer Hospital 1648 Huntingdon Pike Meadowbrook, PA 19046 ph: 215-938-3689 fax: 215-938-3874 Care, Comfort, and Heal Today's Topics: 2. Tissue Adherence Issue (Knutson, Deanne) Message: 2 Date: Wed, 17 Jul 2019 09:21:49 -0500 From: "Knutson, Deanne" <dknut...@primecare.org> Subject: [Histonet] Tissue Adherence Issue Fellow Histonetters - I would appreciate your feedback on an intermittent issue that has shown up in our lab. All of a sudden, we are having difficulty with tissue specimens falling off of our slides on the IHC stains and special stains sporadically. About a year ago, we switched instruments on the IHC bench from the Leica BOND to the ROCHE ULTRA, and we use the Ventana NexES special stainer. No adherence issues with all of the validation slides that were run. We have tried various types of slides recently as well, and the issue still prevails. Would any of you mind telling me your slide workflow - type of slide used, gelatin or not used in flotation bath, how long slides are cooked, etc.... for your IHC slides, for your special stains slides, and even for your H&E slides. I would welcome your suggestions and feedback. Thank you so much!!! Deanne Knutson Supervisor Anatomic Pathology "Let All Be Received as Christ." _______________________________________________ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
