Its better to set the CPU affinity to 1 core right? So each server is affinity'ed to a separate core.
gamead...@127001.org wrote: > In my experience tf2 servers like to jump core every few minutes. If you > don't let them do that, you get a small amount of lag every few minutes > instead. I'm not sure what's going on with the Linux process scheduler > there, but that's my experience. YMMV > >> -----Original Message----- >> From: hlds_linux-boun...@list.valvesoftware.com [mailto:hlds_linux- >> boun...@list.valvesoftware.com] On Behalf Of Zuko >> Sent: 05 March 2009 12:00 >> To: Half-Life dedicated Linux server mailing list >> Subject: Re: [hlds_linux] TF2 CPU Usage on Q9300 >> >> I have same situation (24 players CPU usage about 80-95% Xeon 2.5GHz >> (and >> fps drop for 1-2sec from ~980 to ~60)) >> >> 2009/3/5 DontWannaName! <ad...@topnotchclan.com> >> >>> I would say that those numbers sound about right, more or less. 90 >> max. >>> On Thu, Mar 5, 2009 at 12:59 AM, The Universes >> <ad...@theuniverses.com >>>> wrote: >>>> Is it normal for a 32 man TF2 (Badwater) server to take up 80-90% >> of the >>>> CPU on Q9300 (Quad 2.5ghz) when the server is full and theres a lot >> of >>>> action going on? >>>> >>>> I recompiled my kernel according to the Fragaholics wiki guide. >>>> Kernel 2.6.28.7 #1 SMP PREEMPT Wed Mar 4 17:36:14 PST 2009 x86_64 >> x86_64 >>>> x86_64 GNU/Linux >>>> >>>> CPU scaling is disabled, irqbalance is disabled, server is not >> running >>>> unnecessary services nor web servers, databases, or anything else. >> I >>>> have 4 32man servers running on there, but only 1 is full and the >> other >>>> 3 have a total of 10 or less players combined. >>>> >>>> FPS max is set to 501 and sv_maxrate/cmdrate is 67. Did not change >> tick >>>> or systick via startup options. >>>> >>>> I used taskset to lock the process to single core >>>> # taskset -p 3634 >>>> pid 3634's current affinity mask: 4 >>>> # taskset -p 3331 >>>> pid 3331's current affinity mask: 1 >>>> # taskset -p 3105 >>>> pid 3105's current affinity mask: 2 >>>> # taskset -p 3243 >>>> pid 3243's current affinity mask: 8 >>>> >>>> Am I doing something wrong here, or do you guys have any >> suggestions? >>>> Thanks for any help/advice you can provide. >>>> >>>> - Dan >>>> >>>> _______________________________________________ >>>> To unsubscribe, edit your list preferences, or view the list >> archives, >>>> please visit: >>>> http://list.valvesoftware.com/mailman/listinfo/hlds_linux >>>> >>> _______________________________________________ >>> To unsubscribe, edit your list preferences, or view the list >> archives, >>> please visit: >>> http://list.valvesoftware.com/mailman/listinfo/hlds_linux >>> >> >> >> -- >> Żuko >> _______________________________________________ >> To unsubscribe, edit your list preferences, or view the list archives, >> please visit: >> http://list.valvesoftware.com/mailman/listinfo/hlds_linux > > > _______________________________________________ > To unsubscribe, edit your list preferences, or view the list archives, please > visit: > http://list.valvesoftware.com/mailman/listinfo/hlds_linux _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds_linux