Hi, While trying to get some prints out, I started having trouble with a B/W print - the first one was fine, then when I printed more later, there was a greenish tinge on the "vertical" edges (assuming the print was in the portrait orientation) running from the edge to about 1/4" (6.35mm) in. I tried shifting the print to the left (it was a 12x18 print that I was running on some 18X24 sheets I needed to use up), with the same result.
the prints were made using photoshop cs from a color managed environment on HP premium plus photo satin. My questions to the group are 1) has anybody seen this before, and 2) does anybody have any idea how to "fix" it. Thanks in advance, rkg (Richard George) Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
