no, i am not using a usb hub. my syslog just before scanning is
_____________________________________________________________ Linux version 2.4.27-2-686 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Wed Aug 17 10:34:09 UTC 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000bec0000 (usable) BIOS-e820: 000000000bec0000 - 000000000bef8000 (ACPI data) BIOS-e820: 000000000bef8000 - 000000000bf00000 (ACPI NVS) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 190MB LOWMEM available. On node 0 totalpages: 48832 zone(0): 4096 pages. zone(1): 44736 pages. zone(2): 0 pages. ACPI disabled because your bios is from 2000 and too old You can enable it with acpi=force Kernel command line: root=/dev/hda1 ro Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 863.879 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1723.59 BogoMIPS Memory: 186548k/195328k available (1197k kernel code, 8392k reserved, 452k data, 116k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 863.9063 MHz. ..... host bus clock speed is 132.9084 MHz. cpu: 0, clocks: 1329084, slice: 664542 CPU0<T0:1329072,T1:664528,D:2,S:664542,C:1329084> mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge PCI: Using IRQ router PIIX/ICH [8086/2440] at 00:1f.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4024 blocks [1 disk] into ram disk... done. Freeing initrd memory: 4024k freed VFS: Mounted root (cramfs filesystem). Freeing unused kernel memory: 116k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide: late registration of driver. ICH2: IDE controller at PCI slot 00:1f.1 ICH2: chipset revision 2 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: ST340810A, ATA DISK drive blk: queue cc829cc0, I/O limit 4095Mb (mask 0xffffffff) hdc: SONY DVD RW DW-Q120A, ATAPI CD/DVD-ROM drive hdd: SAMSUNG CD-R/RW SW-232B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: [PTBL] [4865/255/63] p1 p2 p3 p4 < p5 p6 p7 p8 > Real Time Clock Driver v1.10f hdc: attached ide-cdrom driver. hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.12 hdd: attached ide-cdrom driver. hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, DMA Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 148M agpgart: agpgart: Detected an Intel i815 Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 10:51:33 Aug 17 2005 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:1f.2 PCI: Setting latency timer of device 00:1f.2 to 64 usb-uhci.c: USB UHCI at I/O 0xef40, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 9 for device 00:1f.4 PCI: Setting latency timer of device 00:1f.4 to 64 usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Linux video capture interface: v1.00 i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.108 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Bt8xx card found (0). PCI: Found IRQ 11 for device 01:09.0 PCI: Sharing IRQ 11 with 01:09.1 bttv0: Bt878 (rev 17) at 01:09.0, irq: 11, latency: 64, mmio: 0xf6afe000 bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv: readee error bttv0: using tuner=-1 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: registered device video0 bttv0: registered device vbi0 i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0xc2 i2c-core.o: client [(tuner unset)] registered to adapter [bt848 #0](pos. 0). PCI: Found IRQ 10 for device 01:07.0 PCI: Sharing IRQ 10 with 00:1f.3 uhci.c: USB Universal Host Controller Interface driver v1.1 ich2rom: firmware access control, I can't enable writes pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001 i810_rng hardware driver 0.9.8 loaded hw_random: misc device register failed ppdev: user-space parallel port driver parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] ppdev0: registered pardevice ppdev0: unregistered pardevice ppdev1: claim the port first ppdev2: claim the port first lp0: using parport0 (polling). ppdev0: registered pardevice ppdev0: unregistered pardevice ppdev1: claim the port first ppdev2: claim the port first apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) [drm] AGP 0.99 Aperture @ 0xf8000000 64MB [drm] Initialized i810 1.2.1 20020211 on minor 0 mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary PCI: Found IRQ 11 for device 00:02.0 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered spurious 8259A interrupt: IRQ7. hub.c: new USB device 00:1f.2-2, assigned address 2 usb.c: USB device 2 (vend/prod 0x3f0/0x4d11) is not claimed by any active driver. usb.c: registered new driver usblp printer.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 printer.c: v0.13: USB Printer Device Class driver printer.c: usblp0: removed usb.c: USB disconnect on device 00:1f.2-2 address 2 hub.c: new USB device 00:1f.2-2, assigned address 3 printer.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 ppdev0: registered pardevice ppdev0: unregistered pardevice ppdev1: claim the port first ppdev2: claim the port first printer.c: usblp0: removed ppdev0: registered pardevice ppdev0: unregistered pardevice ppdev1: claim the port first ppdev2: claim the port first usb.c: USB disconnect on device 00:1f.2-2 address 3 hub.c: new USB device 00:1f.2-2, assigned address 4 printer.c: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11 printer.c: usblp0: removed ppdev0: registered pardevice ppdev0: unregistered pardevice ppdev1: claim the port first ppdev2: claim the port first ppdev0: registered pardevice ppdev0: unregistered pardevice ppdev1: claim the port first ppdev2: claim the port first kruncher:/home/pragun# ppdev bash: ppdev: command not found ______________________________ the versions of packages are sane-backends 1.0.15 hplip 0.9.11 (patched with 0.9.11-2) ________________________ i hope this helps. On 5/18/06, Aaron J Albright <[EMAIL PROTECTED]> wrote:
Can you capture the syslog during a scan and send the output? Are you using a usb hub? Aaron pragun goyal wrote: > I have compiled and installed hplip-0.9.11 along with the patch 0.9.11-2 > successfully. > The printing is functional but, scanning is not. > Os debian 3.1_r1 (sarge) > relevent part of dmesg says: > > the error given by scanimage is > ------------------------------------------- > scanimage: open of device > hpaio:/usb/PSC_1400_series?serial=MY5BSCC26704BM failed: Error during > device I/O > > ------------------------------------------------------------------ > hub.c: new USB device 00:1f.2-2, assigned address 4 > printer.c: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 > vid 0x03F0 pid 0x4D11 > ppdev0: registered pardevice > ppdev0: unregistered pardevice > ppdev1: claim the port first > ppdev2: claim the port first > printer.c: usblp0: removed > --------------------------------------------------------------------- > > hp-info gives > ----------------------------------------------------------- > > Using device: hp:/usb/PSC_1400_series?serial=MY5BSCC26704BM > > hp:/usb/PSC_1400_series?serial=MY5BSCC26704BM > > Device Parameters (dynamic data): > Parameter Value(s) > ---------------------------- > ---------------------------------------------------------- > 3bit-status-code 24 > 3bit-status-name NoFault > agent1-ack False > agent1-desc Black cartridge > agent1-dvc 0 > agent1-health 0 > agent1-health-desc Good/OK > agent1-hp-ink False > agent1-id 9 > agent1-kind 3 > agent1-known False > agent1-level 91 > agent1-level-trigger 0 > agent1-sku 21 (C9351A) > agent1-type 1 > agent1-virgin False > agent2-ack False > agent2-desc Tri-color cartridge > agent2-dvc 0 > agent2-health 0 > agent2-health-desc Good/OK > agent2-hp-ink False > agent2-id 10 > agent2-kind 3 > agent2-known False > agent2-level 94 > agent2-level-trigger 0 > agent2-sku 22 (C9352A) > agent2-type 2 > agent2-virgin False > back-end hp > cups-printer PSC-1400 > cups-uri > hp:/usb/PSC_1400_series?serial=MY5BSCC26704BM > dev-file > device-state 1 > device-uri > hp:/usb/PSC_1400_series?serial=MY5BSCC26704BM > deviceid MFG:HP;MDL:PSC 1400 > > series;CMD:LDL,MLC,PML,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN > > :MY5BSCC26704BM;S:0380008000020020032c148005bc250005e;Z:00 > 7; > duplexer 0 > error-state 5 > host > in-tray1 True > in-tray2 False > is-hp True > media-path 2 > panel 0 > panel-line1 > panel-line2 > photo-tray 0 > port 1 > r 0 > revision 3 > rg 000 > rr 000000 > rs 000000000 > scan-uri > hpaio:/usb/PSC_1400_series?serial=MY5BSCC26704BM > serial MY5BSCC26704BM > status-code 1003 > status-desc Turning off. > supply-door 0 > top-door 1 > > Model Parameters (static data): > Parameter Value(s) > ---------------------------- > ---------------------------------------------------------- > align-type 6 > case-model-model1 PSC 1401 > case-model-model2 PSC 1402 > case-model-model3 PSC 1410 > case-model-model4 PSC 1410v > case-model-model5 PSC 1410xi > case-model-model6 PSC 1417 > clean-type 2 > color-cal-type 0 > copy-type 0 > embedded-server-type 0 > fax-type 0 > icon psc_1100_series.png > io-control 0 > io-mfp-mode 2 > io-mode 1 > io-scan-port 0 > io-support 2 > linefeed-cal-type 0 > model PSC_1400_series > model-ui HP PSC 1400 series > panel-check-type 0 > pcard-type 0 > pq-diag-type 0 > r0-agent1-kind 3 > r0-agent1-sku 21 (C9351A) > r0-agent1-type 1 > r0-agent2-kind 3 > r0-agent2-sku 22 (C9352A) > r0-agent2-type 2 > scan-type 1 > status-type 2 > support-type 2 > tech-class DJ3320 > tech-type 2 > > ------------------------------------------------------------- > > scanimage -L says: > -------------------------------------------------------------- > > device `hpaio:/usb/PSC_1400_series?serial=MY5BSCC26704BM' is a hp > PSC_1400_series multi-function peripheral > > -------------------------------------------------------------- > > sane-find-scanner says: > -------------------------------------------------------------- > found USB scanner (vendor=0x03f0, product=0x4d11) at libusb:001:006 > ---------------------------------------------------------------- > > scanimage gives this error: > ------------------------------------------------------ > scanimage: open of device > hpaio:/usb/PSC_1400_series?serial=MY5BSCC26704BM failed: Error during > device I/O > ------------------------------------------------------
------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642 _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
