Hi, Running HPLIP 1.6.10 on openSuse 10.1 for my parallel port All In One printer Office Jet Pro 1150c.
Printing works fine but when I try to scan I run into problems. If I try scanning with xsane the device Panel says "Waiting for being allowed to scan" (freely translated from Swedish "Väntar på att få scanna") and the led blinks, after a few minutes xsane report a "device I/O error". Watching the process with hp-toolbox it reports that scan was started and finnished but in reality nothing happened? Tried again but this time with Kooka, same message on the device panel, absolutely nothing happens, no error msg from Kooka. After about 4 minutes hp-toolbox reports that the scan is finnished, but again in reality nothing happened except for the panel message? To rule out any harware error I reebooted into Windows XP and scanned an image from there without any problems at all.. hp-check output: HP Linux Imaging and Printing System (ver. 1.6.10) Dependency/Version Check Utility ver. 4.0 Copyright (c) 2003-6 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. --------------- | SYSTEM INFO | --------------- Basic system info (uname -a): --> Linux linuxserver 2.6.16.21-0.25-default #1 Tue Sep 19 07:26:15 UTC 2006 i6 86 i686 i386 GNU/Linux Detected distro (/etc/issue): --> suse 10.1 Detected distro (lsb_release): --> SUSE LINUX 10.1 (n/a) Currently installed version... --> OK, HPLIP 1.6.10 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf [hpiod] # port=0 (dynamic IP port) port=2208 (IANA IP port) [hpssd] # port=0 (dynamic IP port) port=2207 (IANA IP port) [hplip] version=1.6.10 jdprobe=0 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/HP doc=/usr/share/doc/hplip-1.6.10 # Following values are determined at configure time and cannot be changed. [configure] network-build=1 pp-build=1 gui-build=1 scanner-build=1 fax-build=1 internal-tag=1.6.10.11 HPLIP running? --> Yes, HPLIP is running (OK). HPOJ running? --> No, HPOJ is not running (OK). Checking Python version... --> OK, version 2.4.2 installed ---------------- | DEPENDENCIES | ---------------- Checking for dependency 'libcrypto (libcrypto - OpenSSL cryptographic library)'. .. --> OK, found. Checking for dependency 'gcc (gcc - GNU Project C and C++ Compiler)'... --> OK, found. Checking for dependency 'sane (SANE - Scanning library)'... --> OK, found. Checking for dependency 'gs (GhostScript - PostScript and PDF language interpret er and previewer)'... --> OK, found. Checking for dependency 'libjpeg (libjpeg - JPEG library)'... --> OK, found. Checking for dependency 'libpthread (libpthread - POSIX threads library)'... --> OK, found. Checking for dependency 'make (make - GNU make utility to maintain groups of pro grams)'... --> OK, found. Checking for dependency 'python-devel (python-devel - Python development files)' ... --> OK, found. Checking for dependency 'reportlab (Reportlab - PDF library for Python)'... --> OK, found. Checking for dependency 'pyqt (PyQt - Qt interface for Python)'... --> OK, found. Checking for dependency 'cups-devel (cups-devel- Common Unix Printing System dev elopment files)'... --> OK, found. Checking for dependency 'ppdev (ppdev - Parallel port support kernel module.)'.. . --> OK, found. Checking for dependency 'libusb (libusb - USB library)'... --> OK, found. Checking for dependency 'scanimage (scanimage - Shell scanning program)'... --> OK, found. Checking for dependency 'libnetsnmp-devel (libnetsnmp-devel - SNMP networking li brary development files)'... --> OK, found. Checking for dependency 'python2x (Python 2.2 or greater - Python programming la nguage)'... --> OK, found. Checking for dependency 'lsb (LSB - Linux Standard Base support)'... --> OK, found. Checking for dependency 'xsane (xsane - Graphical scanner frontend for SANE)'... --> OK, found. Checking for dependency 'cups (cups - Common Unix Printing System)'... --> OK, found. Checking for dependency 'python23 (Python 2.3 or greater - Required for fax func tionality)'... --> OK, found. ---------------------- | INSTALLED PRINTERS | ---------------------- OFFICEJET_PRO_1150C ------------------- Device URI: hp:/par/OFFICEJET_PRO_1150C?device=/dev/parport0 Installed in HPLIP? Yes PPD: /etc/cups/ppd/OFFICEJET_PRO_1150C.ppd PPD Description: HP OfficeJet Pro 1150C Foomatic/hpijs (recommended) Printer status: printer OFFICEJET_PRO_1150C is idle. enabled since Jan 01 00:00 printer OFFICEJET_PRO_1150C/Liggande is idle. enabled since Jan 01 00:00 OFFICEJET_PRO_1150C/Liggande ---------------------------- Device URI: hp:/par/OFFICEJET_PRO_1150C?device=/dev/parport0 Installed in HPLIP? Yes OFFICEJET_PRO_1150C_fax ----------------------- Device URI: hpfax:/par/OFFICEJET_PRO_1150C?device=/dev/parport0 Installed in HPLIP? Yes PPD: /etc/cups/ppd/OFFICEJET_PRO_1150C_fax.ppd PPD Description: HP Fax Printer status: printer OFFICEJET_PRO_1150C_fax is idle. enabled since Jan 01 00:00 officejetpro1150c ----------------- Device URI: parallel:/dev/lp0 Installed in HPLIP? No PPD: /etc/cups/ppd/officejetpro1150c.ppd PPD Description: HP OfficeJet Pro 1150C Foomatic/hpijs (recommended) Printer status: printer officejetpro1150c is idle. enabled since Jan 01 00:00 printer officejetpro1150c/(Liggande) is idle. enabled since Jan 01 00:00 error: Incorrect PPD file for fax queue 'officejetpro1150c'. Fax queue must use 'HP-Fax-hplip.ppd'. officejetpro1150c/(Liggande) ---------------------------- Device URI: parallel:/dev/lp0 Installed in HPLIP? No note: Any CUPS queues that are not 'HPLIP Installed', must be installed note: with the 'hp:' or 'hpfax:' backends to have them work in HPLIP. Refer note: to the install instructions on http://hplip.sourceforge.net for more help. ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in /etc/sane.d/dll.conf'... --> OK, found. SANE backend 'hpaio' is not properly set up. Checking output of 'scanimage -L'... device `hpaio:/par/OFFICEJET_PRO_1150C?device=/dev/parport0' is a hp OFFICEJET_PRO_1150C multi-function peripheral device `hpaio:/par/OFFICEJET_PRO_1150C?device=/dev/parport0' is a hp OFFICEJET_PRO_1150C multi-function peripheral --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... --> OK, found. Checking 'pcardext' Photocard extension... --> OK, found. %d errors were detected. Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html
pgpbBdvG7wcpx.pgp
Description: PGP signature
------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
