This could be the problem:
'hpaio' in /etc/sane.d/dll.conf'...
--> OK, found. SANE backend 'hpaio' is not properly set up.
See:
http://hplip.sourceforge.net/troubleshooting/scanning.html
Also if you continue to have this problem run:
tail -f /var/log/messages
try and scan, check the /var/log/messages and post any errors.
On 11/25/06, Mikael Eriksson <[EMAIL PROTECTED]> wrote:
Hi,
Running HPLIP 1.6.10 on openSuse 10.1 for my parallel port All In One
printer
Office Jet Pro 1150c.
Printing works fine but when I try to scan I run into problems.
If I try scanning with xsane the device Panel says "Waiting for being
allowed
to scan" (freely translated from Swedish "Väntar på att få scanna") and
the
led blinks, after a few minutes xsane report a "device I/O error".
Watching the process with hp-toolbox it reports that scan was started and
finnished but in reality nothing happened?
Tried again but this time with Kooka, same message on the device panel,
absolutely nothing happens, no error msg from Kooka. After about 4 minutes
hp-toolbox reports that the scan is finnished, but again in reality
nothing
happened except for the panel message?
To rule out any harware error I reebooted into Windows XP and scanned an
image
from there without any problems at all..
hp-check output:
HP Linux Imaging and Printing System (ver. 1.6.10)
Dependency/Version Check Utility ver. 4.0
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
---------------
| SYSTEM INFO |
---------------
Basic system info (uname -a):
--> Linux linuxserver 2.6.16.21-0.25-default #1 Tue Sep 19 07:26:15 UTC
2006
i6
86 i686 i386 GNU/Linux
Detected distro (/etc/issue):
--> suse 10.1
Detected distro (lsb_release):
--> SUSE LINUX 10.1 (n/a)
Currently installed version...
--> OK, HPLIP 1.6.10 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf
[hpiod]
# port=0 (dynamic IP port)
port=2208 (IANA IP port)
[hpssd]
# port=0 (dynamic IP port)
port=2207 (IANA IP port)
[hplip]
version=1.6.10
jdprobe=0
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
doc=/usr/share/doc/hplip-1.6.10
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=1
pp-build=1
gui-build=1
scanner-build=1
fax-build=1
internal-tag=1.6.10.11
HPLIP running?
--> Yes, HPLIP is running (OK).
HPOJ running?
--> No, HPOJ is not running (OK).
Checking Python version...
--> OK, version 2.4.2 installed
----------------
| DEPENDENCIES |
----------------
Checking for dependency 'libcrypto (libcrypto - OpenSSL cryptographic
library)'.
..
--> OK, found.
Checking for dependency 'gcc (gcc - GNU Project C and C++ Compiler)'...
--> OK, found.
Checking for dependency 'sane (SANE - Scanning library)'...
--> OK, found.
Checking for dependency 'gs (GhostScript - PostScript and PDF language
interpret
er and previewer)'...
--> OK, found.
Checking for dependency 'libjpeg (libjpeg - JPEG library)'...
--> OK, found.
Checking for dependency 'libpthread (libpthread - POSIX threads
library)'...
--> OK, found.
Checking for dependency 'make (make - GNU make utility to maintain groups
of
pro
grams)'...
--> OK, found.
Checking for dependency 'python-devel (python-devel - Python development
files)'
...
--> OK, found.
Checking for dependency 'reportlab (Reportlab - PDF library for
Python)'...
--> OK, found.
Checking for dependency 'pyqt (PyQt - Qt interface for Python)'...
--> OK, found.
Checking for dependency 'cups-devel (cups-devel- Common Unix Printing
System
dev
elopment files)'...
--> OK, found.
Checking for dependency 'ppdev (ppdev - Parallel port support kernel
module.)'..
.
--> OK, found.
Checking for dependency 'libusb (libusb - USB library)'...
--> OK, found.
Checking for dependency 'scanimage (scanimage - Shell scanning
program)'...
--> OK, found.
Checking for dependency 'libnetsnmp-devel (libnetsnmp-devel - SNMP
networking
li
brary development files)'...
--> OK, found.
Checking for dependency 'python2x (Python 2.2 or greater - Python
programming
la
nguage)'...
--> OK, found.
Checking for dependency 'lsb (LSB - Linux Standard Base support)'...
--> OK, found.
Checking for dependency 'xsane (xsane - Graphical scanner frontend for
SANE)'...
--> OK, found.
Checking for dependency 'cups (cups - Common Unix Printing System)'...
--> OK, found.
Checking for dependency 'python23 (Python 2.3 or greater - Required for
fax
func
tionality)'...
--> OK, found.
----------------------
| INSTALLED PRINTERS |
----------------------
OFFICEJET_PRO_1150C
-------------------
Device URI: hp:/par/OFFICEJET_PRO_1150C?device=/dev/parport0
Installed in HPLIP? Yes
PPD: /etc/cups/ppd/OFFICEJET_PRO_1150C.ppd
PPD Description: HP OfficeJet Pro 1150C Foomatic/hpijs (recommended)
Printer status:
printer OFFICEJET_PRO_1150C is idle. enabled since Jan 01 00:00
printer OFFICEJET_PRO_1150C/Liggande is idle. enabled since Jan 01 00:00
OFFICEJET_PRO_1150C/Liggande
----------------------------
Device URI: hp:/par/OFFICEJET_PRO_1150C?device=/dev/parport0
Installed in HPLIP? Yes
OFFICEJET_PRO_1150C_fax
-----------------------
Device URI: hpfax:/par/OFFICEJET_PRO_1150C?device=/dev/parport0
Installed in HPLIP? Yes
PPD: /etc/cups/ppd/OFFICEJET_PRO_1150C_fax.ppd
PPD Description: HP Fax
Printer status:
printer OFFICEJET_PRO_1150C_fax is idle. enabled since Jan 01 00:00
officejetpro1150c
-----------------
Device URI: parallel:/dev/lp0
Installed in HPLIP? No
PPD: /etc/cups/ppd/officejetpro1150c.ppd
PPD Description: HP OfficeJet Pro 1150C Foomatic/hpijs (recommended)
Printer status:
printer officejetpro1150c is idle. enabled since Jan 01 00:00
printer officejetpro1150c/(Liggande) is idle. enabled since Jan 01 00:00
error: Incorrect PPD file for fax queue 'officejetpro1150c'. Fax queue
must
use '
HP-Fax-hplip.ppd'.
officejetpro1150c/(Liggande)
----------------------------
Device URI: parallel:/dev/lp0
Installed in HPLIP? No
note: Any CUPS queues that are not 'HPLIP Installed', must be installed
note: with the 'hp:' or 'hpfax:' backends to have them work in HPLIP.
Refer
note: to the install instructions on http://hplip.sourceforge.net for more
help.
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in /etc/sane.d/dll.conf'...
--> OK, found. SANE backend 'hpaio' is not properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/par/OFFICEJET_PRO_1150C?device=/dev/parport0' is a hp
OFFICEJET_PRO_1150C multi-function peripheral
device `hpaio:/par/OFFICEJET_PRO_1150C?device=/dev/parport0' is a hp
OFFICEJET_PRO_1150C multi-function peripheral
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
--> OK, found.
Checking 'pcardext' Photocard extension...
--> OK, found.
%d errors were detected.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
--
Aaron
--
I don't care, I'm still free - You can't take the sky from me.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
