Can you run "ps ax | grep hp"
and post the result?
A
On 2/8/07, Андрей Хохлушин <[EMAIL PROTECTED]> wrote:
Unfortunally nothink changes. I've recompiled hplip from sources,
with --libdir=/lib64, but hplip doesnt see my printer again.
BTW, i've tried to run backends directly, maybe it could be helpfull:
[EMAIL PROTECTED] lepres]# /usr/lib/cups/backend/hpfax
fatal error: Traceback (innermost last):
File "/usr/share/hplip/base/msg.py", line 147, in xmitMessage
sock.send(m)
error: (32, '\xd0\x9e\xd0\xb1\xd1\x80\xd1\x8b\xd0\xb2
\xd0\xba\xd0\xb0\xd0\xbd\xd0\xb0\xd0\xbb\xd0\xb0')
Traceback (most recent call last):
File "/usr/lib/cups/backend/hpfax", line 111, in <module>
probed_devices = device.probeDevices(None, 'usb,par', filter='fax')
File "/usr/share/hplip/base/device.py", line 379, in probeDevices
xmitMessage(hpiod_sock, "ProbeDevices", None, {'bus' : bus,})
File "/usr/share/hplip/base/msg.py", line 150, in xmitMessage
raise Error(ERROR_INTERNAL)
base.g.Error: ('Unknown internal error', 99)
[EMAIL PROTECTED] lepres]# /usr/lib/cups/backend/hp
unable to receive ProbeDevicesResult: Connection reset by peer
What i have to do to help you solve this my problem?
> There may be an issue with the installer and using a 64 bit
system. I'll
> need to look into it further. However right now you'll want to remove
> hplip. Go into the source directory and enter:
>
> make uninstall
>
> and then
>
> rm -rf /usr/share/hplip
>
> Then follow the instructions from here:
>
> http://hplip.sourceforge.net/install/manual/configure.html
>
> be sure to follow the direction for 64 bit users.
>
> This should resolve your printing problems.
>
> A
>
> On 2/7/07, Андрей Хохлушин <[EMAIL PROTECTED]> wrote:
> > > What linux distro are you running?
> >
> > am running Mandriva 2007.1
> >
> > > Can you run hp-check and post the output?
> >
> > sure, here it is:
> >
> >
> > HP Linux Imaging and Printing System (ver. 1.7.1)
> > Dependency/Version Check Utility ver. 5.2
> >
> > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
> > This software comes with ABSOLUTELY NO WARRANTY.
> > This is free software, and you are welcome to distribute it
> > under certain conditions. See COPYING file for more details.
> >
> >
> > ---------------
> >
> > | SYSTEM INFO |
> >
> > ---------------
> >
> > Basic system information:
> > Linux localhost 2.6.16-2mdkcustomLPR #4 Sun Feb 4 12:24:19 MSK 2007
> > x86_64 AMD
> > Athlon(tm) 64 Processor 3200+ GNU/Linux
> >
> > Detected distro (/etc/issue):
> > mandriva 2007.1
> >
> > Detected distro (lsb_release):
> > MandrivaLinux 2007.1 (Cooker)
> >
> > Currently installed HPLIP version...
> > HPLIP 1.7.1 currently installed in '/usr/share/hplip'.
> >
> > Current contents of '/etc/hp/hplip.conf' file:
> > # hplip.conf
> >
> > [hpiod]
> > # port=0 (dynamic IP port)
> > port=2208
> > [hpssd]
> > # port=0 (dynamic IP port)
> > port=2207
> >
> > [hplip]
> > version=1.7.1
> > jdprobe=0
> >
> > [dirs]
> > home=/usr/share/hplip
> > run=/var/run
> > ppd=/usr/share/ppd/HP
> > doc=/usr/share/doc/hplip-1.7.1
> >
> > # Following values are determined at configure time and cannot be
> > changed. [configure]
> > network-build=0
> > pp-build=0
> > gui-build=1
> > scanner-build=1
> > fax-build=1
> > installinitd=/usr/lib/lsb/install_initd
> > chkconfig=/sbin/chkconfig
> > internal-tag=1.7.1.5
> >
> >
> > HPLIP running?
> > Yes, HPLIP is running (OK).
> >
> > HPOJ running?
> > No, HPOJ is not running (OK).
> >
> > Checking Python version...
> > OK, version 2.5.0 installed
> >
> > Checking PyQt version...
> > OK, version 3.14 installed.
> >
> > Checking SIP version...
> > OK, Version 4.2.1 installed
> >
> > ----------------
> >
> > | DEPENDENCIES |
> >
> > ----------------
> >
> >
> > Checking for dependency libcrypto - OpenSSL cryptographic library...
> > OK, found.
> >
> > Checking for dependency gcc - GNU Project C and C++ Compiler...
> > OK, found.
> >
> > Checking for dependency SANE - Scanning library...
> > OK, found.
> >
> > Checking for dependency GhostScript - PostScript and PDF language
> > interpreter
> > and previewer...
> > OK, found.
> >
> > Checking for dependency libjpeg - JPEG library...
> > warning: Aborted
> > [EMAIL PROTECTED] lepres]# hp-check
> >
> > HP Linux Imaging and Printing System (ver. 1.7.1)
> > Dependency/Version Check Utility ver. 5.2
> >
> > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
> > This software comes with ABSOLUTELY NO WARRANTY.
> > This is free software, and you are welcome to distribute it
> > under certain conditions. See COPYING file for more details.
> >
> >
> > ---------------
> >
> > | SYSTEM INFO |
> >
> > ---------------
> >
> > Basic system information:
> > Linux localhost 2.6.16-2mdkcustomLPR #4 Sun Feb 4 12:24:19 MSK 2007
> > x86_64 AMD
> > Athlon(tm) 64 Processor 3200+ GNU/Linux
> >
> > Detected distro (/etc/issue):
> > mandriva 2007.1
> >
> > Detected distro (lsb_release):
> > MandrivaLinux 2007.1 (Cooker)
> >
> > Currently installed HPLIP version...
> > HPLIP 1.7.1 currently installed in '/usr/share/hplip'.
> >
> > Current contents of '/etc/hp/hplip.conf' file:
> > # hplip.conf
> >
> > [hpiod]
> > # port=0 (dynamic IP port)
> > port=2208
> > [hpssd]
> > # port=0 (dynamic IP port)
> > port=2207
> >
> > [hplip]
> > version=1.7.1
> > jdprobe=0
> >
> > [dirs]
> > home=/usr/share/hplip
> > run=/var/run
> > ppd=/usr/share/ppd/HP
> > doc=/usr/share/doc/hplip-1.7.1
> >
> > # Following values are determined at configure time and cannot be
> > changed. [configure]
> > network-build=0
> > pp-build=0
> > gui-build=1
> > scanner-build=1
> > fax-build=1
> > installinitd=/usr/lib/lsb/install_initd
> > chkconfig=/sbin/chkconfig
> > internal-tag=1.7.1.5
> >
> >
> > HPLIP running?
> > Yes, HPLIP is running (OK).
> >
> > HPOJ running?
> > No, HPOJ is not running (OK).
> >
> > Checking Python version...
> > OK, version 2.5.0 installed
> >
> > Checking PyQt version...
> > OK, version 3.14 installed.
> >
> > Checking SIP version...
> > OK, Version 4.2.1 installed
> >
> > ----------------
> >
> > | DEPENDENCIES |
> >
> > ----------------
> >
> >
> > Checking for dependency libcrypto - OpenSSL cryptographic library...
> > OK, found.
> >
> > Checking for dependency gcc - GNU Project C and C++ Compiler...
> > OK, found.
> >
> > Checking for dependency SANE - Scanning library...
> > OK, found.
> >
> > Checking for dependency GhostScript - PostScript and PDF language
> > interpreter
> > and previewer...
> > OK, found.
> >
> > Checking for dependency libjpeg - JPEG library...
> > OK, found.
> >
> > Checking for dependency libpthread - POSIX threads library...
> > OK, found.
> >
> > Checking for dependency make - GNU make utility to maintain groups of
> > programs...
> > OK, found.
> >
> > Checking for dependency python-devel - Python development files...
> > OK, found.
> >
> > Checking for dependency Reportlab - PDF library for Python...
> > OK, found.
> >
> > Checking for dependency PyQt - Qt interface for Python...
> > OK, found.
> >
> > Checking for dependency cups-devel- Common Unix Printing System
> > development
> > files...
> > OK, found.
> >
> > Checking for dependency ppdev - Parallel port support kernel
module....
> > error: Not found!
> > This is an OPTIONAL dependency. Some HPLIP functionality may not
function
> > properly.
> >
> > Checking for dependency libusb - USB library...
> > OK, found.
> >
> > Checking for dependency scanimage - Shell scanning program...
> > OK, found.
> >
> > Checking for dependency libnetsnmp-devel - SNMP networking library
> > development
> > files...
> > OK, found.
> >
> > Checking for dependency Python 2.2 or greater - Python programming
> > language...
> > OK, found.
> >
> > Checking for dependency LSB - Linux Standard Base support...
> > OK, found.
> >
> > Checking for dependency xsane - Graphical scanner frontend for SANE...
> > OK, found.
> >
> > Checking for dependency cups - Common Unix Printing System...
> > OK, found.
> >
> > Checking for dependency Python 2.3 or greater - Required for fax
> > functionality...
> > OK, found.
> >
> >
> > ----------------------
> >
> > | INSTALLED PRINTERS |
> >
> > ----------------------
> >
> >
> > Brother_HL-2030_series_USB_2
> > ----------------------------
> > Device URI: usb://Brother/HL-2030%20series
> > Installed in HPLIP? No
> > PPD: /etc/cups/ppd/Brother_HL-2030_series_USB_2.ppd
> > PPD Description: Brother HL-2030 for CUPS
> > Printer status: printer Brother_HL-2030_series_USB_2 is idle. enabled
> > since
> > Чтв 08 Фев 2007 00:17:45
> >
> > error: Printer is not HPLIP installed. Printers must use the hp: or
> > hpfax: CUPS backend to function in HPLIP.
> >
> > HP
> > --
> > Device URI: hp:/no_device_found
> > Installed in HPLIP? No
> > PPD: /etc/cups/ppd/HP.ppd
> > PPD Description: HP OfficeJet 4300 Foomatic/hpijs (recommended)
> > Printer status: printer HP now printing HP-571. enabled since Чтв 08
Фев
> > 2007
> > 08:59:30
> > open device failed; will retry in 30 seconds...
> >
> > error: Printer is not HPLIP installed. Printers must use the hp: or
> > hpfax: CUPS backend to function in HPLIP.
> >
> > HPOffJet4300
> > ------------
> > Device URI: usb://HP/Officejet%204300%20series?serial=CN66JFC03Z04GR
> > Installed in HPLIP? No
> > PPD: /etc/cups/ppd/HPOffJet4300.ppd
> > PPD Description: HP OfficeJet 4300 Foomatic/hpijs (recommended)
> > Printer status: printer HPOffJet4300 is idle. enabled since Чтв 08 Фев
> > 2007
> > 02:40:37
> >
> > error: Printer is not HPLIP installed. Printers must use the hp: or
> > hpfax: CUPS backend to function in HPLIP.
> >
> >
> > ----------------------
> >
> > | SANE CONFIGURATION |
> >
> > ----------------------
> >
> > 'hpaio' in /etc/sane.d/dll.conf'...
> > OK, found. SANE backend 'hpaio' is properly set up.
> >
> > Checking output of 'scanimage -L'...
> >
> > No scanners were identified. If you were expecting something
different,
> > check that the scanner is plugged in, turned on and detected by the
> > sane-find-scanner tool (if appropriate). Please read the documentation
> > which came with this software (README, FAQ, manpages).
> >
> >
> > ---------------------
> >
> > | PYTHON EXTENSIONS |
> >
> > ---------------------
> >
> > Checking 'cupsext' CUPS extension...
> > OK, found.
> >
> > Checking 'pcardext' Photocard extension...
> > OK, found.
> >
> >
> > 4 errors were detected.
> > Please refer to the installation instructions at:
> > http://hplip.sourceforge.net/install/index.html
> >
> >
> > --
> > Андрей
> >
> >
-------------------------------------------------------------------------
> > Using Tomcat but need to do more? Need to support web services,
security?
> > Get stuff done quickly with pre-integrated technology to make your job
> > easier.
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > Geronimo
> >
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > _______________________________________________
> > HPLIP-Help mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/hplip-help
--
Andrew
--
I don't care, I'm still free. You can't take the sky from me. - "Firefly"
-
Ubuntu User: #11105
Ubuntu Linux http://ubuntulinux.org
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
HPLIP-Help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hplip-help
