is cups running? N Sridhar wrote: > Hello, > > I did a manual install of hplip on Suse 10.1. However, I am unable to > print to my HP Color Laserjet printer 3500 on windows network in our > office. When I try to add the printer in YAST, I get an output of one > blank page when i click on 'Test Remote SMB Access'. But after i have > added the printer, if i give a test printout, I do not get any > response from the printer. > > The output of my hp-check is given below. As per the output, I get an > indication that the printer is not hplip installed. If i try to > install the printer with hp-install and give the device URI in the > find manually option, I get an error saying that 0 printers were found. > > > > HP Linux Imaging and Printing System (ver. 1.7.4a) > Dependency/Version Check Utility ver. 5.3 > > Copyright (c) 2001-7 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details > > --------------- > | SYSTEM INFO | > --------------- > > Basic system information: > Linux aew0943 2.6.16.27-0.9-smp #1 SMP Tue Feb 13 09:35:18 UTC 2007 > i686 i686 i386 GNU/Linux > > Detected distro (/etc/issue): > suse 10.1 > > Detected distro (lsb_release): > SUSE LINUX 10.1 (n/a) > > Currently installed HPLIP version... > HPLIP 1.7.4a currently installed in '/usr/share/hplip'. > > Current contents of '/etc/hp/hplip.conf' file: > # hplip.conf > > [hpiod] > # port=0 (dynamic IP port) > port=2208 > [hpssd] > # port=0 (dynamic IP port) > port=2207 > > [hplip] > version=1.7.4a > jdprobe=0 > > [dirs] > home=/usr/share/hplip > run=/var/run > ppd=/usr/share/ppd/HP > ppdbase=/usr/share/ppd > doc=/usr/share/doc/hplip-1.7.4a > > # Following values are determined at configure time and cannot be changed. > [configure] > network-build=1 > pp-build=1 > gui-build=1 > scanner-build=1 > fax-build=1 > cups11-build=0 > installinitd=/usr/lib/lsb/install_initd > chkconfig=/sbin/chkconfig > internal-tag=1.7.4.13 > > > HPLIP running? > Yes, HPLIP is running (OK). > > HPOJ running? > No, HPOJ is not running (OK). > > Checking Python version... > OK, version 2.4.2 installed > > Checking PyQt version... > OK, version 3.14 installed. > > Checking SIP version... > OK, Version 4.2.1 installed > > ---------------- > | DEPENDENCIES | > ---------------- > > > Checking for dependency libcrypto - OpenSSL cryptographic library... > OK, found. > > Checking for dependency gcc - GNU Project C and C++ Compiler... > OK, found. > > Checking for dependency SANE - Scanning library... > OK, found. > > Checking for dependency GhostScript - PostScript and PDF language > interpreter and previewer... > OK, found. > > Checking for dependency libjpeg - JPEG library... > OK, found. > > Checking for dependency libpthread - POSIX threads library... > OK, found. > > Checking for dependency make - GNU make utility to maintain groups of > programs... > OK, found. > > Checking for dependency python-devel - Python development files... > OK, found. > > Checking for dependency Reportlab - PDF library for Python... > OK, found. > > Checking for dependency PyQt - Qt interface for Python... > OK, found. > > Checking for dependency cups-devel- Common Unix Printing System > development files... > OK, found. > > Checking for dependency ppdev - Parallel port support kernel module.... > error: Not found! > This is an OPTIONAL dependency. Some HPLIP functionality may not > function properly. > > Checking for dependency libusb - USB library... > OK, found. > > Checking for dependency scanimage - Shell scanning program... > OK, found. > > Checking for dependency libnetsnmp-devel - SNMP networking library > development files... > OK, found. > > Checking for dependency Python 2.2 or greater - Python programming > language... > OK, found. > > Checking for dependency LSB - Linux Standard Base support... > OK, found. > > Checking for dependency xsane - Graphical scanner frontend for SANE... > OK, found. > > Checking for dependency cups - Common Unix Printing System... > OK, found. > > Checking for dependency Python 2.3 or greater - Required for fax > functionality... > OK, found. > > > ---------------------- > | INSTALLED PRINTERS | > ---------------------- > > > HPColorL3500 > ------------ > Device URI: smb://10.1.23.10/HPColorL3500 > Installed in HPLIP? No > PPD: /etc/cups/ppd/HPColorL3500.ppd > PPD Description: HP Color LaserJet 3500 Foomatic/hpijs > Printer status: printer HPColorL3500 is idle. enabled since Jan 01 00:00 > > error: Printer is not HPLIP installed. Printers must use the hp: or > hpfax: CUPS backend to function in HPLIP. (You can still print to this > printer using another backend and HPIJS.) > > UTAX > ---- > Device URI: smb://10.1.23.10/UTAX > Installed in HPLIP? No > PPD: /etc/cups/ppd/UTAX.ppd > PPD Description: Kyocera Mita KM-5035 > Printer status: printer UTAX is idle. enabled since Jan 01 00:00 > > error: Printer is not HPLIP installed. Printers must use the hp: or > hpfax: CUPS backend to function in HPLIP. (You can still print to this > printer using another backend and HPIJS.) > > xerox > ----- > Device URI: smb://10.1.23.10/xerox > Installed in HPLIP? No > PPD: /etc/cups/ppd/xerox.ppd > PPD Description: Xerox Document Centre 400 Foomatic/ljet4 (recommended) > Printer status: printer xerox is idle. enabled since Jan 01 00:00 > > error: Printer is not HPLIP installed. Printers must use the hp: or > hpfax: CUPS backend to function in HPLIP. (You can still print to this > printer using another backend and HPIJS.) > > > ---------------------- > | SANE CONFIGURATION | > ---------------------- > > 'hpaio' in '/etc/sane.d/dll.conf'... > OK, found. SANE backend 'hpaio' is properly set up. > > Checking output of 'scanimage -L'... > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > > > --------------------- > | PYTHON EXTENSIONS | > --------------------- > > Checking 'cupsext' CUPS extension... > OK, found. > > Checking 'pcardext' Photocard extension... > OK, found. > > > 4 errors were detected. > Please refer to the installation instructions at: > http://hplip.sourceforge.net/install/index.html > > > Regards > > N. Sridhar > > -- > > > Mail Client: Thunderbird > > Get Thunderbird <http://www.mozilla.org/products/thunderbird/> > > Browser: Firefox > > Get Firefox! <http://www.spreadfirefox.com/?q=affiliates&id=0&t=55> > > Office Suite: OpenOffice > > Get Open Office <http://www.openoffice.org/> > > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > ------------------------------------------------------------------------ > > _______________________________________________ > HPLIP-Help mailing list > HPLIP-Help@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/hplip-help >
-- *Raena Lea-Shannon *Partner /fl /Frankel Lawyers www.frankellawyers.com.au <http://www.frankellawyers.com.au/>268 Devonshire Street Surry Hills NSW 2010 Ph: 02 9318 2900 Fax: 02 9318 1690 email: [EMAIL PROTECTED] This is a confidential transmission from Frankel Lawyers. This message contains confidential information which also may be privileged, and is intended for the addressee only. If you are not the intended recipient of this message please delete the message immediately and call Frankel Lawyers on (02) 9318 2900. Liability is limited by a Scheme approved under Professional Standards ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
