Hi,
Still struggling with this problem, I wonder whether the ppd file for the
2605 I am using is correct?
Today I ran cupstestppd -v on the ppd file and although brightness, gamma,
hue and saturation show up as options in the hplip and xpp gui's, I see that
they neither pass nor fail according to cupstestppd itself - they don't
appear at all. Nor do they appear as options at localhost:631 nor in the
Scribus print dialogue, although all the other options do.
Also, looking through the .ppd file itself, (out of my depth now), I see
there are 'group' numbers which relate to the other options which work, but
not to the colour options.
Is there another ppd file somewhere I can try, or am misunderstanding how
this works?
Nick
On 9/24/07, Nick Davies <[EMAIL PROTECTED]> wrote:
>
>
> 1. See if these settings can be set using the http://localhost:631interface
> > 2. Use XPP or GtkLP and see if they are settable
> >
>
> The image quality options, (brightness, gamma, hue, saturation), are not
> available from the localhost:631 interface - there's a space where they
> should be, but they don't appear.
>
> I tried XPP and although the settings were there, hue and saturation did
> nothing.
>
> By the way, I also downloaded the ppd file from linuxprinting.org to see
> if it would make a difference. It didn't.
>
> Nick
>
> On 9/24/07, dwelch91 <[EMAIL PROTECTED]> wrote:
> >
> > It appears, from studying the PPD file, that the group of Halftone, RGB
> > Color, Neutral Grays are not C, M, and Y as you suspected but rather for
> > Text, Graphics, and Photo modes (I'm assuming in that order in the UI, but
> > I'm not sure).
> >
> > As far as the toner goes, I'm assuming that if you used new HP supplies
> > that the colors are correct or more to your liking?
> >
> > -Don
> >
> >
> > On 9/24/07, Nick Davies <[EMAIL PROTECTED]> wrote:
> > >
> > > Hi,
> > >
> > > My laserjet 2605 is working fine except that I would like to adjust
> > > the colours. Under the, 'Print Settings', tab, there are several Color
> > > Options which appear to be repeated three times, (Half Tone, RGB Color,
> > > Neutral Greys), and I wonder if they are C,M and Y but I cannot find any
> > > instructions on how to use these settings. (See attached). Also,
> > > adjusting
> > > Hue and Saturation seems to have no effect for me.
> > >
> > > Are there some instructions on how to use the gui somewhere?
> > >
> > > Thanks,
> > >
> > > Nick
> > >
> > > (Kubuntu 7.04, hplip 1.7.3)
> > >
> > >
> > > -------------------------------------------------------------------------
> > > This SF.net email is sponsored by: Microsoft
> > > Defy all challenges. Microsoft(R) Visual Studio 2005.
> > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > > _______________________________________________
> > > HPLIP-Help mailing list
> > > HPLIP-Help@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/hplip-help
> > >
> > >
> > >
> >
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
