Good Day Scott Can you post the out put of
$hp-check -t Thanks jh Scott Castaline wrote: > After initial boot the first print job that I send to my printer will > just sit in the queue. The queue will state that it is processing the > job, but nothing happens. I will then go and cancel the job and resubmit > the same document or web page and it'll print just fine. This happened > to both my PSC2610v all-in-one, and my new Officejet Pro L7780. I have > found that if I print from my email client it'll print on the first > request no problem. It also dosen't make any difference if the printer > is off or on. > > Set up info: uname -r = 2.6.22.9-91.fc7 > email client = Thunderbird 2.0.0.5 > the printer is setup on a LAN (wired 100Base-T) > I no longer have the PSC2610v and the L7780 is the replacement for it. > > Logs do not indicate any errors. The HP-Toolbox GUI shows the device > unavailable until I cancel the first job. I am able to ping the device > while this is happening. The GUI for the gnome printer control panel > shows no problem, but will hang if I send a test page. > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and a browser. > Download your FREE copy of Splunk now >> http://get.splunk.com/ ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
