Just saved both files and ran the following steps: - Open Hugin 2009.2.4450 (by Ad), on my Windows Vista SP3 setup. - Clicked "Align..." on the assistant tab, which started APSCpp 2.5.2. As you can see in the output which I pasted below, something is going wrong: APSCpp is reporting FOV of 180 degrees. It should be closer to 75 degrees, if the 24mm reported focal length is correct. This is a (known) bug with the current 2.5.2 build. - Trying the "Create control points" button using Panomatic instead (Images tab), the images got aligned well enough. Not perfect, but well enough. - Opened the GL preview. The image borders are clearly visible, partly from the imperfect overlap, but also in the blue part of the sky. - Opened the traditional preview. Image borders less well pronounced. - Ran Exposure optimization with the default setting (low dynamic range). The traditional preview looks better now, while the GL preview still shows the same borders (pressing the Photometrics button shows the optimized results, which are quite good). - Stitching results in a seamless stitch.
NB: upon trying with an older version of APSCpp (the one supplied with SVN 4075), the "Align" button in the assistant tab yields a perfect result (including correct exposures) right away. -- Bart APSCpp output below --------- APSCpp, enhanced autopano-sift-c version 2.5.2 23July2009 Default fisheye lens type is equal-area. Focal length will be computed from hfov. Stereographic projection enabled for hfov >= 65.0 degrees. Filename C:\temp\panotemp\_MG_8888.JPG rectilinear width 5616 height 3744 hfov 180 reduce to 1600 x 1066 (Scale 3.5100)... convert to stereographic projection ... find keypoints ... 32 keypoints found Filename C:\temp\panotemp\_MG_8889.JPG rectilinear width 5616 height 3744 hfov 180 reduce to 1600 x 1066 (Scale 3.5100)... convert to stereographic projection ... find keypoints ... 15 keypoints found --------- On 12 okt, 12:20, don <don...@gmail.com> wrote: > here are the > originalshttp://don.vn.cz/temp/repo/hugin/_MG_8888.JPGhttp://don.vn.cz/temp/repo/hugin/_MG_8889.JPG > (both files are 7 MB big) > [snip] --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -~----------~----~----~----~------~----~------~--~---
