Hi, I have put online some samples taken with a T2i (not full frame) using an Opteka 6.5mm:
http://cartola.org/arquivos/Samples_T2i_Opteka6.5.zip In the file I put also a hugin projet used to stitch them. There are 12 images. I usually take more images than necessary to cover the whole sphere in order to have redundancy, mainly when there is people. You can see in the pto file that the last was not used at the end. I did some adjustments in GIMP in the final panorama and you can see the final image I did here: http://cartola.org/360/en/2012/01/04/workshop-at-iv-gnugraf/ At the end of the post I put some technical information (most of the times people don't see that) listing all software and hardware I have used. I really don't know if someone would notice the difference of a panorama made with a true fisheye or that lens you put on top of a non fisheye. I guess you probably can have some black borders with that, like you would have with a true fisheye in a fullframe camera. I had them when I used one in a point and shoot. You can think about your money, purpose and opinion. Do you have the money for a true fisheye? Will you miss this money? Are you professional or amateur? Cheers, Carlos E G Carvalho (Cartola) http://cartola.org/360 2012/1/19 Thomas Pryds <tho...@pryds.eu> > Hi > > Does anyone here know of somewhere to obtain a (free) set of fisheye > images in a reasonable resolution for stitching into a panorama? It would > be great to try experimenting a bit with Hugin and some fisheye images > before actually going out to buy a fisheye lens for my camera. I have been > searching Google for such a set, but unfortunately without luck. > > On a side note: What would you recommend? A "true" fisheye lens to put > directly onto the camera body, or one of these (less expensive) lenses to > put on top of an ordinary lens? > > Thanks, > Thomas > > -- > You received this message because you are subscribed to the Google Groups > "Hugin and other free panoramic software" group. > A list of frequently asked questions is available at: > http://wiki.panotools.org/Hugin_FAQ > To post to this group, send email to hugin-ptx@googlegroups.com > To unsubscribe from this group, send email to > hugin-ptx+unsubscr...@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/hugin-ptx > -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx