>I recently purchased the rm1x and have these two issues:
>1- With the rm1x connected to my Opcode Studio 3 midi interface, the rm1x
seems to be outputing a constant signal. The in/out lights >are constantly
flashing very faintly on my Studio 3 (they flash brighter with midi
signals). These signals cannot be midi because my >sampler (a3000) and my
tone module (fs1r) midi indicators are not flashing. The set-up works
perfectly with both sampler and module >responding to midi during playback
and recording. I've changed some parameters in the utility mode but can't
get the lights to stop. >Does the RM1X send a timing signal? Ive tried
different settings for timing in the utility mode but can't seem to get the
signals to turn >off. They are very annoying as ther flash constantly while
nothings happening!
http://members.xoom.com/MIDIOX/midiox.htm
this is a nice (free) tool to monitor MIDI stuff (PC)
>2- When recording in grid mode ( drums on track 1), how come i can't hear
the other tracks (a baseline on track 9, for example)? I >can hear all the
other tracks in the other recording modes: replace and overdub. Is there
something amiss? Under setup the, out >channels are setup to TG.
in GRID u only hear the 'current' voice , silly, isnt it :)
>thanks (sorry about the length), rwbw :-)
