Add i2c board intialisers to specify the I2C devices attached on the Thorcom VR1000.
Signed-off-by: Ben Dooks <[EMAIL PROTECTED]> Index: linux-2.6.26-rc4-quilt1/arch/arm/mach-s3c2410/mach-vr1000.c =================================================================== --- linux-2.6.26-rc4-quilt1.orig/arch/arm/mach-s3c2410/mach-vr1000.c 2008-05-27 23:31:41.000000000 +0100 +++ linux-2.6.26-rc4-quilt1/arch/arm/mach-s3c2410/mach-vr1000.c 2008-05-27 23:59:05.000000000 +0100 @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/mach-vr1000.c * - * Copyright (c) 2003-2005 Simtec Electronics + * Copyright (c) 2003-2005,2008 Simtec Electronics * Ben Dooks <[EMAIL PROTECTED]> * * Machine support for Thorcom VR1000 board. Designed for Thorcom by @@ -19,6 +19,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/dm9000.h> +#include <linux/i2c.h> #include <linux/serial.h> #include <linux/tty.h> @@ -315,6 +316,24 @@ static struct platform_device vr1000_led }, }; +/* I2C devices. */ + +static struct i2c_board_info vr1000_i2c_info[] __initdata = { + { + .type = "tlv320aic23", + .addr = 0x1a, + }, { + .type = "tmp101", + .addr = 0x48, + }, { + .type = "eeprom", + .addr = 0x50, + }, { + .type = "m41st87", + .addr = 0x68, + }, +}; + /* devices for this board */ static struct platform_device *vr1000_devices[] __initdata = { @@ -373,6 +392,9 @@ static void __init vr1000_init(void) { platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices)); + i2c_register_board_info(0, vr1000_i2c_info, + ARRAY_SIZE(vr1000_i2c_info)); + nor_simtec_init(); } -- Ben ([EMAIL PROTECTED], http://www.fluff.org/) 'a smiley only costs 4 bytes' _______________________________________________ i2c mailing list i2c@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/i2c