Hi All, Does anyone have any experience in defining a Cascaded CISCO Ficon switch in HCD?
I believe that we need to know both the Domain ID of the Switch and the Switch Address, but we are unable to determine what the Switch address is? Documentation on the Internet (an IBM redbook!) states that Switch Address should be the Hex version of Domain ID, but then goes on to show that both numbers are the same e.g x'21' and 21. A D M=DEV(A000) of our devices shows the following: CHP 24 26 ENTRY LINK ADDRESS 4182 43A2 DEST LINK ADDRESS 6608 6808 PATH ONLINE Y N CHP PHYSICALLY ONLINE Y Y PATH OPERATIONAL Y Y PATHS NOT VALIDATED The entry link address's shown are not what we have coded in HCD? Do I need to simply change the entry link address to 41 and 43 (from 66 and 68 as the redbook implied!) ? Any help appreciated from anyone whose coded this before.... Phil Kingston. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html