Hi, All, Here's the output from an FTP GET (userID and DSNs changed to protect privacy):
.230 USERID is logged on. Working directory is "USERID.". .EZA1460I Command: .EZA1736I LOCSITE LRECL=80 BLOCKSIZE=27920 CYLINDERS PRIMARY=2 SECONDARY=1 .EZA1460I Command: .EZA1736I GET 'AAA.BBB.CCC.DDD' + .EZA1736I 'EEE.FFF.GGG.HHH(+1)' (REPLACE .EZA1685W Invalid local file identifier .EZA1735I Std Return Code = 16000, Error Code = 00018 Problem seems to be with GET to a GDG. Programmer says this transfer works if it's a PUT. I've already checked the RACF dataset profiles, and USERID has the requisite access to both dataset names. Messages manual says to see the IP User's Guide and Commands for info about the return and error codes, but I must be blind or worse: I can't find them in that manual. Further, in reading thru all the examples for GET, there isn't one showing a GET into a GDG. The explanations preceding the examples appear to suggest that GETting to a GDG is supported; perhaps there's a hoop or two that we haven't jumped thru correctly? Any ideas appreciated. -jc- ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html