Doug Many thanks. CA have also replied to me directly and I am applying 4 hipers for 11.8
My money was on Sysview ... although strangely it seems that SYSVIEW's DA display shows the correct CPU time, obviously more Ops-MVS aware than SDSF and MXI. Regards Paul -----Original Message----- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Doug Henry Sent: 16 December 2010 14:46 To: IBM-MAIN@bama.ua.edu Subject: Re: Strange CPUTIME values On Thu, 16 Dec 2010 10:40:57 +0000, Beesley, Paul <paul.bees...@atosorigin.com> wrote: >Good morning list. > >Apologies for the long post ... > >We have a strange problem on one LPAR since the last IPL in the early >hours of Monday morning, whereby the CPU time used by jobs ( as >displayed on the SDSF DA panel, and in the IEFACTRT reports ) is a >fraction of what it should be. >CPU (SRB): 00:00:18.59 >reported it had used CPU (TCB): 00:03:12.90. > >The IPL was to upgrade 4 CA products (MIM, OpsMVS, Sysview, CA1) and >Syncsort, and apply a handful of PTFs recommended for the MIM upgrade, >none of which affect CPU reporting/recording. > >Unfortunately this is z/OS 1.9 so I can't raise a PMR with IBM ( we're >upgrading Q1/Q2 2011 ). > >Any ideas what could have caused this ? Not a critical problem but it's >causing problems with the customer's reports > Hi Paul, This is an OPS/MVS 11.8 problem. PROBLEM DESCRIPTION: OPSMVS 11.8 by default uses ENCLAVES for performance purposes, which may have adverse effects on performance tools, DB2, Websphere, and any other products that use ENCLAVES. CIRCUMVENTION: For immediate relief, change option INITWME in opsview 4.1.1 to NO. Then issue the following MVS command: F OPSx,restart(WME) /* where OPSx is your opsmvs subsystem name */ Apply the associated PTF in order to disable enclave joins for the time being, or remember to change your OPSxPAnn parameter member to include the following statement to reflect this change: T= OPSPRM_SET("initwme","no") The PTF will not affect the INITWME Parameter, but will disable any newjoins. Doug Doug Doug ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html _______________________________________________________ Atos Origin and Atos Consulting are trading names used by the Atos Origin group. The following trading entities are registered in England and Wales: Atos Origin IT Services UK Limited (registered number 01245534) and Atos Consulting Limited (registered number 04312380). The registered office for each is at 4 Triton Square, Regents Place, London, NW1 3HG.The VAT No. for each is: GB232327983 This e-mail and the documents attached are confidential and intended solely for the addressee, and may contain confidential or privileged information. If you receive this e-mail in error, you are not authorised to copy, disclose, use or retain it. Please notify the sender immediately and delete this email from your systems. As emails may be intercepted, amended or lost, they are not secure. Atos Origin therefore can accept no liability for any errors or their content. Although Atos Origin endeavours to maintain a virus-free network, we do not warrant that this transmission is virus-free and can accept no liability for any damages resulting from any virus transmitted. The risks are deemed to be accepted by everyone who communicates with Atos Origin by email. _______________________________________________________ ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
