The RMM SEARCHVOL command would be even easier. On Thu, Mar 31, 2011 at 3:48 PM, Robert A. Rosenberg <[email protected]>wrote:
> At 03:36 -0500 on 03/31/2011, Mike Wood wrote about Re: 3592 carts: > > > To ensure rmm has the correct location name, once the above volcat change >> is >> done, you can issue >> RMM CV volser LOCATION(SHELF) FORCE >> this should update rmm to correct the location to SHELF. >> > > To created the needed commands, I have found that using an Assembler Macro > that issues PUNCH commands to output the command is useful. You just have > the macro loop a volser counter to create the command text. So long as there > is a compact volser range this is enough to create the individual commands > needed. > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > CONFIDENTIALITY/EMAIL NOTICE: The material in this transmission contains confidential and privileged information intended only for the addressee. If you are not the intended recipient, please be advised that you have received this material in error and that any forwarding, copying, printing, distribution, use or disclosure of the material is strictly prohibited. If you have received this material in error, please (i) do not read it, (ii) reply to the sender that you received the message in error, and (iii) erase or destroy the material. Emails are not secure and can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by email. Thank you. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
