On Tue, Mar 6, 2012 at 4:07 PM, Bill Fairchild < bfairch...@rocketsoftware.com> wrote:
> Sobre-pequeño? Izquierdo medio? Alto medio? Gordo-pequeño? No sé. > > I have never had to use only the high half of a grande, only the low half > or the entire grande. So I haven't yet named the high half. > > I think that would be the left-hand-high-grande. :-) > Bill Fairchild > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On > Behalf Of Edward Jaffe > Sent: Tuesday, March 06, 2012 4:53 PM > To: IBM-MAIN@bama.ua.edu > Subject: Re: LAE instruction > > On 3/6/2012 1:35 PM, Bill Fairchild wrote: > > I use GRx to mean the 64-bit Register x (aka "Grande") and Rx to mean > the 32-bit Register x (aka "pequec"). > > If the low halves are called the "pequeño registers" then what are the > high halves called? > > -- > Edward E Jaffe > Phoenix Software International, Inc > 831 Parkview Drive North > El Segundo, CA 90245 > 310-338-0400 x318 > edja...@phoenixsoftware.com > http://www.phoenixsoftware.com/ > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email > to lists...@bama.ua.edu with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN