David Lesser wrote:
I would change DLOGMOD to SCS. This really does not matter, but it
makes things less confusing.
TRSPL017 APPL AUTH=NVPACE, X
EAS=1, X
PARSESS=NO, X
MODETAB=ISTINCLM,DLOGMOD=D6328904, X
SESSLIM=YES,USSTAB=ISTINCDT
It has been a while since I looked at the mapping setup but you have
something that makes it appear that you are attemping to only allow the
IP address 194.90.29.17 to map to the LU name TRKPL017. But based on
the error message you are attempting to connect from 194.90.29.155. If
this is what you are attemping to do, then make sure you have the
correct client IP address.
If mapping is setup correctly and you attempt to connect from a client
that is NOT allowed to use a specific LU or LU Pool, you will get the
error that the LU does not exist. Which seems to be what is happening here.
PRTMAP SPLPRS PRTSERV GENERIC
PRTGROUP PGRP2
TRSPL017
ENDPRTGROUP
PRTMAP PGRP2 194.90.29.71 ;
ALLOWAPPL *
ENDVTAM
<--- Begin Snip --- >
<--- End Snip --- >
We see this error on the MF console
EZZ6034I TELNET CONN 00007991 LU **N/A** ACCEPTED 23
IP..PORT: 194.90.29.155..3079
EZZ6035I TELNET DEBUG DETAIL CLIENT
IP..PORT: 194.90.29.155..3079
CONN: 00007991 LU: MOD: EZBTPGLU
RCODE: 3004-00 LU is not available.
PARM1: 00000000 PARM2: 00000000 PARM3: 00000000
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html