Gadi, You don't have to add 4 more ESCON channels. You can define additional control units (and devices) on the channels you are already using. Gerrit van Arnhem.
גדי בן אבי <[EMAIL PROTECTED]> Verzonden door: IBM Mainframe Discussion List <IBM-MAIN@BAMA.UA.EDU> 25-07-2006 11:02 Antwoord a.u.b. aan IBM Mainframe Discussion List <IBM-MAIN@BAMA.UA.EDU> Aan IBM-MAIN@BAMA.UA.EDU Cc Onderwerp CTC connections for SYSPLEX Hi, We currently have two z890's. Each z890 has a production LPAR and a test LPAR. The production LPAR's are connected to one SYSPLEX and the TEST LPAR's to another. We now have to add another production LPAR to one of the z890's and connect it to the production SYSPLEX. The SYSPLEX is a base sysplex and the connections between the system are CTC's. As I see it I have to use 4 more ESCON connections on the system where I add the LPAR, and two ESCON connections on the other system. Is there any way to have an 'internal CTC' to connect the LPAR's that are on the same physical box? TIA Gadi ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ____________ De informatie in dit e-mailbericht en eventuele bijlagen is vertrouwelijk en is alleen bestemd voor de beoogde ontvanger(s). Indien u dit bericht ten onrechte heeft ontvangen, wordt u verzocht de verzender daarvan in kennis te stellen en het bericht te vernietigen. Het is niet toegestaan de hierin opgenomen informatie op welke wijze dan ook te gebruiken of openbaar te maken. The information contained in this e-mail, including possible attachments, is confidential and is solely for the use of the intended recipient(s). Should you have received this e-mail unintentionally you are then requested to inform the sender and to destroy the message. It is prohibited to use or disclose the information this message contains in whatsoever way.