SVCDUMP will write data to an SQA resident buffer, pointed to by CVT+24C. This environment data. At offset 8 is an EBCDIC field containing REGS, followed by (R0-R15) the GPR contents. After the registers is the an EBCDIC "PSW " followed by the PSW, then the PASD, SASD and ARS. Wayne Driscoll Product Developer JME Software LLC NOTE: All opinions are strictly my own.
-----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of David Day Sent: Monday, October 23, 2006 12:00 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Question on setting a storge alteration slip trap to take an SVC dump Since this is not an error situation, in the sense that there is an SDWA and such to be recorded and RTM2 area to look at, what do I tell the slip process to record such that I can go to the dump, and easily identify the task and PSW that is walking on a piece of storage? The storage is in the private area of a multi-tasking application. Thanks, --Dave Day ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html