You must be looking in the wrong manual. The following is from Quickref on a Zos 1.4 system:
IOAA282E IOAx282E OSAD device does not exist for CHPID cc Explanation: The OSAD device with unit address X'FE' associated with the specified CHPID (cc) has not been defined. User Response: Perform the following checks and steps: o Check the I/O definitions in the IODF/IOCDS to ensure an OSAD device (X'FE') has been defined for this CHPID. o Update and activate the IODF if necessary o Display the CHPID and unit status information for CHPID cc o Verify the OSAD device is ONLINE o Then restart operations on CHPID cc -----Original Message----- From: Alvaro Quintupray B. [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 19, 2006 3:24 PM To: IBM-MAIN@BAMA.UA.EDU Subject: IOAK282E OSAD Device does not exist for CHPID xx Hi. Somebody knows about this ..? IOAK282E OSAD device does not exist for CHPID 00 IOAK282E OSAD device does not exist for CHPID 01 IOAK282E OSAD device does not exist for CHPID 03 IOAK282E OSAD device does not exist for CHPID 04 IOAK282E OSAD device does not exist for CHPID 05 IOAC146E 16:59:08 No OSA devices were initialized The message does not exist in the manuals .. How I can resolve this problem ..? Thanks. Alvaro. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html