We fired up our 1st set of 1.8 LPARs this last weekend. All in all it was pretty good. IDCAMs steps with no region are getting RC=12. Put a region on them and everything works great. Same job runs okay under 1.7.
___________________________________________ Jim Petersen MVS - Lead Systems Engineer Home Depot Technology Center 1300 Park Center Drive, Austin, TX 78753 www.homedepot.com email: [EMAIL PROTECTED] 512-977-2615 direct 512-977-2930 fax 210-859-9887 cell This message may contain confidential information. The information contained in this message and any attachments are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any disclosure, copying, distribution or other use of the contents of this message is strictly prohibited. If you have received this email in error, please notify the sender immediately by email and delete all copies of this message -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Jousma, David Sent: Monday, June 04, 2007 5:45 AM To: IBM-MAIN@BAMA.UA.EDU Subject: z/os 1.8 upgrade mostly good All, Just wanted to give the list some feedback on our latest round of 1.8 upgrades. We upgraded 3 production lpars over the weekend, and so far all is looking pretty good(a little early to tell), with one exception so far. We have an open ETR with IBM. What we are seeing is some batch jobs failing with S80A-10, S878 type abends. Run them on a 1.6 system, and the are ok. Compared virtual storage map between versions, and available private below the line is the same. There are a couple of common denominators in that they all are DB2 type utilities(BMC COPY PLUS, IBM DB2 utils, Princeton), and they all use many tapes. We've sent a dump off to IBM for analysis. Anyone see this? As we find out more, I'll keep the list up-to-date. Dave ________________________________________________________ Dave Jousma Principal Systems Programmer [EMAIL PROTECTED] 616.653.8429 This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
