Crispin, For a stacker loader to index to the next available volume, it needs to be in auto mode, or in system mode but also the system must tell it to index. So, despite the MPRIVAT display the load display CCW that was sent to the device needs to have the index bit on. Someone may be messing with the LOAD DISPLAY - check whether you have IGXMSGEX installed and what it does. You could SLIP on entry/exit from that to see what the load display is/has been changed to. See the DFSMS Installation exits book; http://publibz.boulder.ibm.com/cgi- bin/bookmgr_OS390/BOOKS/dgt2c740/2.8.2.3? SHELF=EZ2ZO10I.bks&DT=20060621014040
Mike Wood RMM Development On Fri, 6 Jul 2007 17:15:43 +0100, Crispin Hugo <[EMAIL PROTECTED]> wrote: >Has anyone had problems with 3590-E11 on A60 in system mode and z/OS ? >We have 3590-B11's on A50 in system mode and they work fine. We have just >acquired 2 3990-E11's on an A60 controller and when in system mode, they do >not load tapes . They just sit there with MPRIVAT flashing away. > >The definitions in IOCP etc are EXACTLY the same as for 3590-B11 which work >fine. > >Crispin Hugo > >Systems Programmer, Macro 4 ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
