Is there anyway to create a latch problem on a test PDSE to test the restartable STC? Thanks Matt
>>> Mark Zelden <[EMAIL PROTECTED]> 1/3/2008 9:04 AM >>> On Wed, 2 Jan 2008 18:11:20 -0500, Craddock, Chris <[EMAIL PROTECTED]> wrote: >> I have 3 monoplexes that have SMSPDSE1 but all of them >> also specify PDSESHARING(EXTENDED) > >Color me confused. PDSE sharing across sysplex boundaries is forbidden >and so specifying it for a monoplex would seem to be superfluous at >best. > Yes... but required for PDSE_RESTARTABLE_AS(YES) as I wrote. We added PDSESHARING(EXTENDED) and PDSE_RESTARTABLE_AS(YES) as we rolled out z/OS 1.6. Why is it required? Ask IBM. I'm sure they will give you a good reason. :-) http://bama.ua.edu/cgi-bin/wa?A2=ind0801&L=ibm-main&D=1&O=D&P=5480 BTW, since I have nothing better to do (NOT) during our year end change freeze, I did try IPLing a monoplex sandbox LPAR without PDSESHARING(EXTENDED) along with specifying PDSE_RESTARTABLE_AS(YES) and SMSPDSE1 was not created as documented. Doc from the fine manual: http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/IEA2E280/54.9?SHELF=IEA2BK80&DT=20070516223132 PDSE_RESTARTABLE_AS(YES|NO) Specifies whether PDSE initialization during IPL NIP processing brings up a second restartable PDSE address space. If you specify PDSE_RESTARTABLE_AS(YES), with PDSESHARING(EXTENDED), and EXTENDED sharing is not used, processing does not allow PDSE initialization to create a second restartable PDSE address space. The PDSE_RESTARTABLE_AS specification is set in the IGDSMSxx member of SYS1.PARMLIB. This value cannot be changed through an operator Default: NO -- Mark Zelden Sr. Software and Systems Architect - z/OS Team Lead Zurich North America / Farmers Insurance Group - ZFUS G-ITO mailto:[EMAIL PROTECTED] z/OS Systems Programming expert at http://expertanswercenter.techtarget.com/ Mark's MVS Utilities: http://home.flash.net/~mzelden/mvsutil.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
