Can you CONFIG OFF/ON the OSA chpid? Fermat
2009/5/19 גדי בן אבי <gad...@malam.com> > Hi, > > > > I am having trouble configuring an OSA port using OSA/SF. > > We have OSA Express2 1000Base cards. One port is defined as ICC (OSC) and > the other as OSE. > > We would like to share the OSE port between all the LPARs defined on the > computer and be used for SNA as well as TCP/IP. > > Each LPAR has one ‘real’ address defined and many virtual (VIPA) addresses. > > > > As far as I understand I have to perform the following steps using IOACMD: > > 1. Option 4 get_config. – Perfromed successfully > > 2. Option 6 – get_OSA_access_table – did not work OK. I got these > messages: > > OAT data received for entry 1 is corrupted > > eyecatcher IOA_OATENTRY not found where expected > > EXEC ending > > I copied the definitions from SIOASAMP and customized them as I > understood. > > 3. When I tried to configure the OSA using option 2 in IOACMD I > didn’t get an option for a OSA express2 1000BaseT. I pressed ENTER which is > supposed to locate all the OSA cards, but none were found. > > > > I spoke to someone who suggested I reset the card, but that did not help. > > I tried varying the channel offline and online. Didn’t help > > > > We are running z/OS 1.9 on a z890. > > Our SE tells us we are up to date on all microcode updates. > > > > Can anyone help? > > > > TIA > > > > Gadi > > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
