Cross Posting to IBMMAIN and TCPIP Sorry, failed to put in the above notice. Hope someone has an answer.
From: John Mattson/Epson To: IBM Mainframe Discussion List <ibm-m...@bama.ua.edu>, IBM TCP/IP List <ibmtc...@vm.marist.edu> Date: 08/15/2012 06:02 PM Subject: Simple question about BEGINROUTES, how to force traffic for a segment thru one OSA address I have a really simple IP net on zOS 1.11. Two OSA adaptors FA00 & FB00 and I want to route everything for the segment 192.xxx.xxx to FA00 and everything ELSE thru FB00. My current IP parms include the following where LINKMQFB00 is for OSA DEVFB00 and FA for FA. BEGINROUTES ; Destination Subnet Mask First Hop Link Name Packet Size ROUTE 136.239.131.0/24 = LNKMQFB00 MTU 1492 ROUTE 192.168.240.0/24 = LNKMQFA00 MTU 1492 ROUTE DEFAULT 136.239.131.1 LNKMQFB00 MTU 1492 ENDROUTES What I am seeing is everything go thru the DEFAULT (I'm basing this on the "Refcnt") EZZ2350I MVS TCP/IP NETSTAT CS V1R11 TCPIP Name: TCPMQ 17:52:19 EZZ2755I Destination Gateway Flags Refcnt Interface EZZ2756I ----------- ------- ----- ------ --------- EZZ2757I Default 136.239.131.1 UGS 0000000032 LNKMQF000 EZZ2757I 127.0.0.1/32 0.0.0.0 UH 0000000000 LOOPBACK EZZ2757I 136.239.131.0/24 0.0.0.0 US 0000000000 LNKMQFB00 EZZ2757I 192.168.240.0/24 0.0.0.0 US 0000000000 LNKMQFA00 EZZ2757I 136.239.131.205/32 0.0.0.0 UH 0000000000 LNKMQFB00 How may I most easily set this so that all traffic thru this IP stack to the 192.168.240 segment uses the FA00 device, and everything else uses the FB00 device? ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN