Thank you for the information. While requesting for a eject a tape in use will report us the same ? I mean will it stall our request when a tape in use .
On Thu, 27 Aug, 2020, 7:00 pm Erika Dawson, <bro...@us.ibm.com> wrote: > I checked with the RMM service team and they had indicated that clients > will typically generate the eject commands after the DSTORE HSKP has run. > > > Here's some additional information from one of the RMM manuals if the > volumes are being system-managed in an IBM tape library ... > > DFSMSrmm does not automatically eject volumes from a system-managed tape > library as part of inventory management processing. To request that a > volume is ejected from a system-managed tape library, use the DFSMSrmm > Change Volume Details panel to change the location for a volume residing in > a system-managed library or use the RMM CHANGEVOLUME subcommand to change > the location or issue an eject request. Figure 1 shows how to use the > CHANGEVOLUME subcommand to change a volume's location to its shelf > location. The change to the SHELF causes the volume to be ejected from a > system-managed tape library. > Figure 1. Ejecting a volume from a system-managed library > RMM CHANGEVOLUME volser LOCATION(SHELF) > > > https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.4.0/com.ibm.zos.v2r4.idarm00/manejt.htm > > They had also suggested that you can open a Q&A PMR (Case) and they can > verify what you may have setup to eject the tape volumes and answer any > additional questions that you have. > > Erika Dawson (IBM) > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN