AFAIK it should have a very low probability. This due to that those that can access from outside of the Sysplex (special sysprogs) have neither reason or interest of doing that. And this is 3.00 AM here. (At least the operator I spoke to had no knowledge of anyone else that me working at this time.)
I have restored a backup from yesterday now so the immediate problem is solved. (And saved the corrupted PDSE in case anyone except me is interested.) Best Regards, Thomas Berg ___________________________________________________________________ Thomas Berg Specialist zOS/RQM/IT Delivery Swedbank AB (Publ) Interactive is 'manual.' Batch is 'automatic.' > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of > Mark Jacobs - Listserv > Sent: Tuesday, May 26, 2015 3:10 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Corrupt PDSE - IGW699I PDSE Directory Validation Unsuccessful > > Could it have been shared(R/W) outside of a sysplex boundary? > > Mark Jacobs > > > Thomas Berg <mailto:thomas.b...@swedbank.se> > > May 25, 2015 at 8:43 PM > > Got a corrupt PDSE. Will throw the problem at some of the responsible > > sysprogs. > > But in the meantime I wonder if any of the esteem members of this list > > can give some hints leading to the cause. > > > > Got this when tying a browse from ISPF 3.4 (linecmd B): > > > > IGW699I PDSE Directory Validation Unsuccessful > > DESC:PDSE structure is corrupted > > ERROR NUM:103 > > DSN:SYS6.IDI.PROD5.HIST > > VOLSER:GEM040 > > ADPages:10169 IXRecords:405168 > > ADPagesInCore:159 ADPagesRead:10010 > > ADTreeLevels:3 > > NDPages:21 IXRecords:2460 > > NDPagesInCore:7 NDPagesRead:14 > > NDTreeLevels:2 > > AD ND Tree Nodes:2430 > > Version:1 > > Orphan Pages:4682 > > RC:4 RS:01188012 > > IGW702I PDSE Directory Validation Unsuccessful > > DESC:<AD> Structure is corrupted > > LTK:D561C14040404040404040404040404040404040 > > IEA995I SYMPTOM DUMP OUTPUT > > SYSTEM COMPLETION CODE=0F4 REASON CODE=00000024 > > TIME=02.28.25 SEQ=58662 CPU=0000 ASID=0457 > > PSW AT TIME OF ERROR 075C1000 888B9690 ILC 2 INTC 0D > > NO ACTIVE MODULE FOUND - PRIMARY NOT EQUAL TO HOME > > NAME=UNKNOWN > > DATA AT PSW 088B968A - 58F05048 0A0DB219 0000A788 > > AR/GR 0: 007FF6C8/01188012 1: 00000000/040F4000 > > 2: 00000001/00FDB9A0 3: 00000000/7B1A2268 > > 4: 00000002/00007703 5: 00000000/7B1A7400 > > 6: 00000000/7B1A2060 7: 00000000/00FE0548 > > 8: 00000000/00FE05B8 9: 00000001/7B1A2268 > > A: 00000000/7B1A7868 B: 00000000/00000000 > > C: 00000000/088B9012 D: 00000000/7B1A7778 > > E: 00000000/888B9682 F: 00000000/00000024 > > END OF SYMPTOM DUMP > > ERROR NUM:1 > > DSN:SYS6.IDI.PROD5.HIST > > VOLSER:GEM040 > > RC:4 RS:01188012 R14:0876C2A4 > > RPN:N/A > > VPTVFN:N/A > > IEC036I 002-A4,IGC0005E,S000TBE,KAT30,ISP02264,786B,GEM040, > > SYS6.IDI.PROD5.HIST > > ERROR DESCRIPTION: IEC036I > > Unable to complete the READ against the PDSE directory due to an error > > return code from the SMS service used to obtain directory information. > > END ERROR DESCRIPTION: IEC036I > > IRX0250E System abend code 002, reason code 00000164. > > IRX0255E Abend in host command SELECT or address environment routine > > ISPEXEC. > > *** > > > > > > The dataset is a Fault Analyzer dump pdse. Is populated from > > productions abends (in another system - same Sysplex). > > Was browsing from the dev system. We have 7 other similar datasets, > > all populated from the prod system and mostly viewed from the dev > > system. First time for me of a corrupt PDSE causing an abend like this. > > > > > > > > Best Regards, > > Thomas Berg > > ___________________________________________________________________ > > Thomas Berg Specialist zOS/RQM/IT Delivery Swedbank AB (Publ) > > > > Interactive is 'manual.' Batch is 'automatic.' > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > > > Please be alert for any emails that may ask you for login information > > or directs you to login via a link. If you believe this message is a > > phish or aren't sure whether this message is trustworthy, please send > > the original message as an attachment to 'phish...@timeinc.com'. > > > > -- > > Mark Jacobs > Time Customer Service > Technology and Product Engineering > > The standard you walk past is the standard you accept. > Lt. Gen. David Morrison > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
