Yea, it looks damaged to me too. I'd still recommend that you validate
the integrity of the restored dataset, just to be safe.
Mark Jacobs
Thomas Berg <mailto:thomas.b...@swedbank.se>
May 25, 2015 at 10:00 PM
Tried on another prodsystem. Got this:
IGW699I PDSE Directory Validation Unsuccessful
IEA995I SYMPTOM DUMP OUTPUT
SYSTEM COMPLETION CODE=0F4 REASON CODE=00000024
TIME=03.59.10 SEQ=44968 CPU=0000 ASID=01F8
PSW AT TIME OF ERROR 075C1000 88FDA690 ILC 2 INTC 0D
NO ACTIVE MODULE FOUND - PRIMARY NOT EQUAL TO HOME
NAME=UNKNOWN
DATA AT PSW 08FDA68A - 58F05048 0A0DB219 0000A788
AR/GR 0: 008FF6C8/01188012 1: 00000000/040F4000
2: 00000001/00FDB9A0 3: 00000000/7EC6E268
4: 00000002/00007703 5: 00000000/7EC73400
6: 00000000/7EC6E060 7: 00000000/00FE0548
8: 00000000/00FE05B8 9: 00000001/7EC6E268
A: 00000000/7EC73868 B: 00000000/00000000
C: 00000000/08FDA012 D: 00000000/7EC73778
E: 00000000/88FDA682 F: 00000000/00000024
END OF SYMPTOM DUMP
DESC:PDSE structure is corrupted
ERROR NUM:103
DSN:SYS6.IDI.PROD5.HIST.FEL
VOLSER:GEM040
ADPages:10169 IXRecords:405168
ADPagesInCore:159 ADPagesRead:10010
ADTreeLevels:3
NDPages:21 IXRecords:2460
NDPagesInCore:7 NDPagesRead:14
NDTreeLevels:2
AD ND Tree Nodes:2430
Version:1
Orphan Pages:4682
RC:4 RS:01188012
IGW702I PDSE Directory Validation Unsuccessful
DESC:<AD> Structure is corrupted
LTK:D561C14040404040404040404040404040404040
ERROR NUM:1
DSN:SYS6.IDI.PROD5.HIST.FEL
VOLSER:GEM040
RC:4 RS:01188012 R14:08E8D2A4
RPN:N/A
VPTVFN:N/A
IEC036I 002-A4,IGC0005E,S000TBE,KAT30,ISP03594,786B,GEM040,
SYS6.IDI.PROD5.HIST.FEL
IRX0250E System abend code 002, reason code 00000164.
IRX0255E Abend in host command SELECT or address environment routine
ISPEXEC.
***
Best Regards,
Thomas Berg
___________________________________________________________________
Thomas Berg Specialist zOS/RQM/IT Delivery Swedbank AB (Publ)
Interactive is 'manual.' Batch is 'automatic.'
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Mark Jacobs - Listserv <mailto:mark.jac...@custserv.com>
May 25, 2015 at 9:50 PM
Three more questions.
1. Do you have all the required toleration maintenance applied on your
1.13 system?
2. Does the hang occur on all systems in the sysplex or just one?
1. If only on one, can you recycle the SMSPDSE1 address space and
see if that fixes the problem?
Mark Jacobs
Thomas Berg <mailto:thomas.b...@swedbank.se>
May 25, 2015 at 9:47 PM
BTW, we are on zOS 2.1 in the DEV system and zOS 1.13 in the prod system.
Best Regards,
Thomas Berg
___________________________________________________________________
Thomas Berg Specialist zOS/RQM/IT Delivery Swedbank AB (Publ)
Interactive is 'manual.' Batch is 'automatic.'
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Mark Jacobs - Listserv <mailto:mark.jac...@custserv.com>
May 25, 2015 at 9:27 PM
If you take a physical dump of the dataset and send it into IBM for
analysis they might be able to get to the root cause. Assuming you're
on zOS 1.13 or higher did you execute IEBPDSE against the restored
dataset to verify its structure?
Mark Jacobs
Thomas Berg <mailto:thomas.b...@swedbank.se>
May 25, 2015 at 9:23 PM
AFAIK it should have a very low probability. This due to that those
that can access from outside of the Sysplex (special sysprogs) have
neither reason or interest of doing that. And this is 3.00 AM here.
(At least the operator I spoke to had no knowledge of anyone else that
me working at this time.)
I have restored a backup from yesterday now so the immediate problem
is solved. (And saved the corrupted PDSE in case anyone except me is
interested.)
Best Regards,
Thomas Berg
___________________________________________________________________
Thomas Berg Specialist zOS/RQM/IT Delivery Swedbank AB (Publ)
Interactive is 'manual.' Batch is 'automatic.'
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
--
Mark Jacobs
Time Customer Service
Technology and Product Engineering
The standard you walk past is the standard you accept.
Lt. Gen. David Morrison
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
