So I ran a test with the JCL and change VIO to SYSDA and it worked fine. I suspect the answer about SMS in your shop redirecting from VIO to DASD may be true.
Lizette -----Original Message----- >From: "Farley, Peter x23353" <peter.far...@broadridge.com> >Sent: Jul 17, 2015 3:13 PM >To: IBM-MAIN@LISTSERV.UA.EDU >Subject: Re: HISTORIC RETURN CODE IS 196 DIAGNOSTIC INFORMATION IS 0C060090 > >Some shops use ACS routines to convert UNIT=VIO to a "real" DASD allocation, >preferring to use outboard DASD (with all their built-in memory-based cache) >in preference to CEC memory. > >Perhaps the first LPAR has that policy and your zPDT is configured to use >memory for VIO? > >Not sure if there really is a restriction from allocating PDSE on VIO, but it >would not surprise me. > >HTH > >Peter > >-----Original Message----- >From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On >Behalf Of Roland Kinsman >Sent: Friday, July 17, 2015 5:42 PM >To: IBM-MAIN@LISTSERV.UA.EDU >Subject: HISTORIC RETURN CODE IS 196 DIAGNOSTIC INFORMATION IS 0C060090 > >This JCL... > >//STEP01 EXEC PGM=IEFBR14 >//ALC DD DSN=&&XX00500, >// DISP=(NEW,CATLG,DELETE), >// DSNTYPE=LIBRARY, >// UNIT=VIO, >// DCB=(RECFM=U,LRECL=0,BLKSIZE=27998,DSORG=PO), >// SPACE=(CYL,(25,5,200)) > >works fine on one LPAR. On another LPAR, which happens to be a zPDT, it fails >with the following error messages: > >IGD17040I ERROR IN DADSM PROCESSING ON VOLUME UNKNWN FOR DATA SET > SYS15198.T160706.RA000.HCHRJK0A.XX00500.H01 > HISTORIC RETURN CODE IS 196 DIAGNOSTIC INFORMATION IS 0C060090 > IGD306I UNEXPECTED ERROR DURING IGGDAC02 PROCESSING > RETURN CODE 12 REASON CODE 144 > THE MODULE THAT DETECTED THE ERROR IS IGDVTSDA > SMS MODULE TRACE BACK - VTSDA VTSCR SSIRT > SYMPTOM RECORD CREATED, PROBLEM ID IS IGD00000 > >It seems the key message is... >HISTORIC RETURN CODE IS 196 DIAGNOSTIC INFORMATION IS 0C060090 > >Which seems to suggest that PDSE cannot be allocated on VIO. > >So why does it work on one LPAR but not the other? > >It's making me a little crazy. > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
