Just for giggles, do a $DEXIT(*) (check my memory for correct command) and see if there are any exits active
Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of Pommier, Rex > Sent: Friday, January 06, 2017 9:37 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: IPLing z/OS 2.2 from 1.13 for first time getting JES2 > catastrophic error > > Interesting idea, Lizette. I just tried again, after removing all EXIT > statements from my JES2PARM. Same result, $BR1 catastrophic error. > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of Lizette Koehler > Sent: Friday, January 06, 2017 10:13 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: IPLing z/OS 2.2 from 1.13 for first time getting JES2 > catastrophic error > > Allan, > > True. The intent was to think about > 1) Any JES2 Exits in place that might be causing the issue > 2) Are all Vendor related fixes for JES2 installed for the migration. > > Just because something is old, does not mean it could not provide insight on > an issue. > > :-D > > Lizette > > > > -----Original Message----- > > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > > On Behalf Of Allan Staller > > Sent: Friday, January 06, 2017 7:54 AM > > To: IBM-MAIN@LISTSERV.UA.EDU > > Subject: Re: IPLing z/OS 2.2 from 1.13 for first time getting JES2 > > catastrophic error > > > > That APAR is ancient. The current numbers APAR numbers are OA6xxxx. > > Seems like > > OA25662 would be circa z/OS 1.4 vintage. > > > > -----Original Message----- > > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > > On Behalf Of Lizette Koehler > > Sent: Friday, January 6, 2017 8:50 AM > > To: IBM-MAIN@LISTSERV.UA.EDU > > Subject: Re: IPLing z/OS 2.2 from 1.13 for first time getting JES2 > > catastrophic error > > > > You did not indicate if you have MVS Solutions Thruput Manager. > > > > If you do, I found this on their website > > > > PR08075 TR62009 $ADD LOADMOD(DTMJ2MV6) command fails with a > > $BR1 ABEND > > after IBM APAR OA25562. > > > > Lizette > > > > > > > -----Original Message----- > > > From: IBM Mainframe Discussion List > > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Pommier, Rex > > > Sent: Friday, January 06, 2017 6:51 AM > > > To: IBM-MAIN@LISTSERV.UA.EDU > > > Subject: Re: IPLing z/OS 2.2 from 1.13 for first time getting JES2 > > > catastrophic error > > > > > > Hi Tony, > > > > > > There wasn't one. The manual says the reason code is optional and > > > for $BR1, it got optioned out. > > > > > > *21.10.54 *$HASP493 JES2 ALL-MEMBER WARM START IS IN PROGRESS - > > > * z11 MODE > > > *21.10.54 *$HASP095 JES2 CATASTROPHIC ERROR. CODE = $BR1 > > > $HASP088 HASPIRDA 165B7690 + 000F8C OA49165 BERTMAP > > > $HASP088 HASPIRA 165B5000 + 0004FC OA47827 IRDA > > > $HASP088 PCE = INIT (165B6008) > > > $HASP088 R0 = 00000000 3A54502C 0000342C 00000000 > > > $HASP088 R4 = 16CA7000 000073B7 00007718 48B4CC30 > > > $HASP088 R8 = 3A545018 009FE980 16642BD0 00007000 > > > $HASP088 R12 = 1647B098 165B6008 9647B144 00000008 > > > > > > This was followed by the 02D abend. > > > > > > Thanks, > > > > > > Rex > > > > > > -----Original Message----- > > > From: IBM Mainframe Discussion List > > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Tony Harminc > > > Sent: Thursday, January 05, 2017 7:02 PM > > > To: IBM-MAIN@LISTSERV.UA.EDU > > > Subject: Re: IPLing z/OS 2.2 from 1.13 for first time getting JES2 > > > catastrophic error > > > > > > On 5 January 2017 at 12:38, Pommier, Rex <rpomm...@sfgmembers.com> wrote: > > > > 2) $BR1 in M&C gives me "lots" of good information <sarc>. > > > > The doc says "JES2 initialization processing encountered an error > > > > examining > > > the BERT maps" and the resolution is " > > > > Use the indicative dump and the SVC dump (if any) to diagnose the > error.". > > > > > > What's the reason code with the $BR1? > > > > > > Tony H. > > > > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN